ONKYO 29344937 User Manual

Zone 2

In addition to your main listening room, you can also enjoy playback in the other room, or as we call Zone 2. And, you
can select a different source for each room.

Connecting Your Zone 2 Speakers Directly
to the AV receiver

This setup allows 5.1-channel playback in your main
room and 2-channel stereo playback in Zone 2, with a
different source in each room. This is called Powered
Zone 2, as the Zone 2 speakers are powered by the AV
receiver. Note that when Powered Zone 2 is turned off,
you can enjoy 7.1-channel playback in your main room.

Hookup
Connect your Zone 2 speakers to the AV receiver’s
ZONE 2 SPEAKERS L/R speaker terminals.

Notes:
• With this setup, the Zone 2 volume is controlled by the

AV receiver.

• “Powered Zone 2” cannot be used if “Sp Type” is set

to “Bi-Amp” (page 44).

Connecting Your Zone 2 Speakers to an
Amp in Zone 2

This setup allows 7.1-channel playback in your main
listening room and 2-channel stereo playback in Zone 2,
with a different source in each room.

Hookup
• Use an RCA audio cable to connect the AV receiver’s

ZONE 2 LINE OUT L/R jacks to an analog audio
input on your Zone 2 amp.

• Connect your Zone 2 speakers to the speaker

terminals on your Zone 2 amp.

Note:
The Zone 2 volume must be set on the Zone 2 amp.

Connecting Zone 2

To use this setup, you must set the “Powered Zone 2”
setting to “Act” (see page 81).

Main room

Zone 2

AV receiver

ZONE 2

LINE OUT

Main room

Zone 2

Receiver/

integrated amp

AV receiver