Rocketfish RF-RBWS02 User Manual

24

Adjust the audio level on the Rocketfish receiver so that the volume 

range is proportional to your other AV receiver channels.

The system is capable of driving high definition audio to your 
multi-channel surround home theater system and remote listening 
zones.

• Press the HD A/B button to activate HD audio on the appropriate input 

channel.

• The corresponding HD A or B indicator lights blue.

• The HD indicator on the joined receiver lights up.

• Only activate high definition audio when using the high definition 

disks (such as Blu-ray disk).

The volume control on the receiver is only used to adjust the volume 
balance between the front and surround speakers. After the system is 
set up, we recommend that you adjust the volume balance one time.

Wireless links create a small latency between the sender and receiver, 
and many A/V receivers let you adjust the delay between the various 
speakers in your surround system.
To optimize your system, we suggest that you subtract about 15 ms 
from the delay to the surround speakers, this will perfectly match 
your surround system.

• Press the SOURCE A/B button on the sender to stop the audio signals from 

being transmitted from either input A or B.

RF-RBKIT_09-0473_MAN_ENG_V1.fm  Page 24  Thursday, August 27, 2009  6:44 PM