Sony DAV-IS50 User Manual

Follow the steps below to make the basic 
adjustments for using the system.

• When you connect the system and the TV with the 

component video cord (not supplied) or HDMI cable 
(not supplied), you need to set the type of video 
output for matching your TV. For details, see “Setting 
the type of video output to match your TV” (page 36).

Press [/1 on the control unit and 
POWER on the surround amplifier.
The system turns on.

• Make sure that the function is set to “DVD” 

(page 41).

Switch the input selector on your TV so 
that the signal from the system 
appears on the TV screen.
[Press [ENTER] to run QUICK SETUP.] 
appears at the bottom of the TV screen. If 
this message does not appear, recall the 
Quick Setup display (page 36) and perform 
again.

The Setup Display for selecting the 
language used in the on-screen display 
appears on the TV screen.

X/x to select a language.

The system displays the menu and subtitles 
in the selected language.

Press .
The Setup Display for selecting the aspect 
ratio of the TV to be connected appears.

X/x to select the setting that 

x If you have a wide-screen TV or a 4:3 
standard TV with a wide-screen mode
[16:9] (page 91)

x If you have a 4:3 standard TV
[4:3 LETTER BOX] or [4:3 PAN SCAN] 
(page 91)

Connect the calibration microphone to 
the ECM-AC2 jack on the rear of the 
control unit.
Set up the calibration microphone at the ear 
level using a tripod, etc. (not supplied).
The front of each speaker should face the 
calibration microphone, and there should be 
no obstruction between the speakers and the 
calibration microphone. 

"/1

C/X/x/c, 

 DISPLAY

LANGUAGE SETUP

MENU:

OSD:

AUDIO:
SUBTITLE:

ENGLISH
ENGLISH

FRANÇAIS

DEUTSCH

ITALIANO

ESPAÑOL

NEDERLANDS

DANSK

SVENSKA

VIDEO SETUP

PROGRESSIVE 

(COMPONENT OUT)

:

4:3 OUTPUT:
PAUSE MODE:

4:3 PAN SCAN

4:3 LETTER BOX

TV TYPE:

16:9
16:9