Sony DAV-IS50 User Manual

Press .
The setting is made.

Press SYSTEM MENU.
The system menu turns off.

• When you set “S-AIR STBY” to “ON”, the power 

consumption during the standby mode increases.

• When you turn the system off while “S-AIR STBY” 

is set to “ON,” “S-AIR” flashes (when sound 
transmission between the S-AIR main unit and S-AIR 
receiver is not established), or lights up (when sound 
transmission between the S-AIR main unit and S-AIR 
receiver is established) in the front panel display.

• When the wireless transmitter is not inserted in the 

S-AIR main unit, you cannot set “S-AIR STBY”.

• “S-AIR STBY” is set to “OFF” automatically when 

the wireless transmitter is removed from the S-AIR 
main unit.

• When you turn the system off while “S-AIR STBY” 

is set to “ON”, you cannot use any buttons other than 
"/1

 button.

• When there is no disc in the S-AIR main unit and 

“S-AIR” lights up in the front panel display, you can 
load a disc into the S-AIR main unit and enjoy music 
by the S-AIR receiver.

It is easy to set the same ID for the S-AIR main 
unit and an S-AIR sub unit, such as a surround 
amplifier or S-AIR receiver, to establish sound 
transmission. However, neighbours may also 
receive your system’s sound if IDs are the same, 
or you may receive the sound from neighbours. 
To prevent this, you can identify the S-AIR main 
unit with a specific S-AIR sub unit by 
performing the pairing operation.

x Before pairing
Sound transmission is established by the ID 
(example).

x After pairing
Sound transmission is established between the 
paired S-AIR

 

main unit and S-AIR sub unit(s) 

only.

• Remove headphones from the surround 

amplifier (if connected).

S-AIR main unit

ID A

S-AIR sub unit

ID A

ID A

S-AIR sub unit

S-AIR main unit

ID A

S-AIR sub unit

ID A

ID A

S-AIR sub unit

Pairing

No transmission