Sony DAV-IS50 User Manual

• Depending on the DVD, [4:3 LETTER BOX] may be 

selected automatically instead of [4:3 PAN SCAN] or 
vice versa.

x [PROGRESSIVE (COMPONENT OUT)]
You can set the progressive signal that is output 
from the COMPONENT VIDEO OUT jacks to 
on/off. For details, see “Does your TV accept 
progressive signals?” (page 37).

The confirmation display appears. 

C/c to select [START].

The system outputs the progressive signal 
for 5 seconds. Check that the screen is 
displayed correctly.

 Press C/c to select [YES].
The system outputs the progressive signal. 
If you select [NO], the system will not 
output the progressive signal.

• [PROGRESSIVE (COMPONENT OUT)] is 

effective only when you connect the control unit and 
TV with a component video cord (page 27).

x [4:3 OUTPUT]
When you use a 16:9 aspect ratio TV, you can 
adjust the aspect ratio to watch 4:3 aspect ratio 
signals. If you can change the aspect ratio on 
your TV, change the setting on your TV, not the 
system.

• [4:3 OUTPUT] is effective only when you set [TV 

TYPE] in [VIDEO SETUP] to [16:9].

x [PAUSE MODE] (DVD VIDEO/DVD-R/
DVD-RW only)
You can select the picture in pause mode.

The system outputs interlace 
signals.

The system outputs progressive 
signals. When you select [ON], 
follow the steps below.

Select this when you can change 
the aspect ratio on your TV.

Select this when you cannot 
change the aspect ratio on your 
TV. A 16:9 aspect ratio signal 
with black bands on left and right 
sides of the image appears.

The picture, including subjects 
that move dynamically, is output 
with no jitter.

The picture, including subjects 
that do not move dynamically, is 
output in high resolution.

16:9 aspect ratio TV