Tascam SN29401376 User Manual

• The HYBRID STANDBY indicator may light depending on the 

status of settings (

➔ page 47).

• For details on power management settings, see “Auto Standby” 

(

8RECEIVER

or

8RECEIVER on the 

remote controller.
The AV receiver comes on and its display lights.

or

8RECEIVER on the 

remote controller.
The AV receiver will enter standby mode. To prevent 
any loud surprises when you turn on the AV receiver, 
always turn down the volume before you turn it off.

■

To ensure smooth operation, here’s a few easy steps to 
help you configure the AV receiver before you use it for 
the very first time. These settings only need to be made 
once. See “Initial Setup” for details (

➔ page 19).

■

When a new version of the firmware is available, the 
notification window “Firmware Update Available” 
pops up. This notification only appears when the AV 
receiver is connected to your home network 
(

➔ page 89). To perform the firmware update, follow 

the instructions on screen.

Use 

q/w and ENTER on the AV receiver or remote 

controller to select one of the options.

`

Update Now:

Starts the firmware update.
Refer to “Firmware Update” (

➔ page 80).

`

Remind me Later:

The update notification will pop up again the next 
time you turn the AV receiver on.

`

Never Remind me:

Disables the automatic update notification.

• The update notification window can be enabled or disabled in 

“Update Notice” (