Vivitek DU6675 User Manual

DU6675 DLP Projector - User's Manual

18

Installing the Optional Color Wheel
The projector comes with a four-segment color wheel installed. An additional six-segment 

color wheel is an optional. To replace the color wheel (located under the lamp cover 

adjacent to lamp 1) refer to the following guide.

• Wait until the lamp house and the color wheel cool off

• Only use the projector on a solid, level surface. Serious injury and damage can occur if the projector is 

dropped.

1.  Remove the screws (A) on the lamp 

cover. Lift the lamp cover in the 

direction   of the arrow (B).

B

A

1.  Insert the new color wheel.

!

2.  Unscrew the retaining screws (x 4) on 

the color wheel.

2.  Tighten the 4 screws on the color 

wheel.

3.  Lift the color wheel in the direction 

shown.

!

3.  Place the color wheel (A) and tighten 

the screw on the lamp cover as below 

illustration (B).

A

B

• Keep the unused color wheel in the zipper bag in which the 6-segment color wheel was packaged. This bag 

prevents dust from falling or collecting on the color wheel.