Vivitek DU6675 User Manual

DU6675 DLP Projector - User's Manual

20

Once the projector is correctly located and the power cable and other connections are in 

place, it is important that the projector is powered on correctly in order to avoid damage to 

components and unnecessary wear and tear. 

Refer to the following guide to power on the projector.

1.  Connect the power cable (A). Press the  

  main power switch to the on ( I ) position  

  as shown (B), the Power LED lights    

 orange.

2.  Press the POWER button on the control  

  panel or ON button on the remote control  

  once, the Power LED flashes green and  

  the internal cooling fan starts.

3.  After approximately 10 seconds, the   

  Lamp1 and Lamp2 LEDs light green and  

  the Power LED flashes more rapidly.

4.  Once the power LED is lit a solid green,  

  the projector is ready for use.

• If any of the LEDs remain flashing or blink, there may be a problem with the startup. Please refer to the 

Troubleshooting section.