Nilfisk Alto 2000 User Manual
AMERICAN-LINCOLN TECHNOLOGY
1 - 23
SMART 2000
OPERATING INSTRUCTIONS
BEFORE STARTING THE MACHINE
1.
1.
Set parking brake.
2.
Make sure all controls are in the “OFF” position.
3.
Be sure the directional control pedal is in neutral.
4.
Ensure the batteries have been fully charged and serviced (see battery service instructions).
NOTE
Before starting the engine, perform the pre-start checklist.
PRE-START CHECKLIST
1
1
Clean engine air filter element.
2
Check hydraulic fluid level.
3
Check all systems for leaks.
4
Check brakes and controls for proper operation.
5
Check broom patterns.
6
Check to ensure that all covers, panels and access doors are securely closed.
NOTE
To prevent possible fire, never fill fuel tank while the engine is running. Always be sure gasoline container and
machine are grounded before dispensing gas. This can be done by permanently attaching an insulated wire with a
battery clip on the end to the gasoline container.
STARTING BATTERY MACHINES
Starting the battery powered models is accomplished by turning the key switch to the “I” (on) position. It is
important to note that the batteries should be fully charged and serviced prior to using the machine.
Starting the battery powered models is accomplished by turning the key switch to the “I” (on) position. It is
important to note that the batteries should be fully charged and serviced prior to using the machine.
NOTE
After turning off the machine, perform these post-operation checks.
POST-OPERATION CHECKLIST
1.
1.
Clean the debris hopper.
2.
Check sweeping brooms for wear or damage.
3.
Check all flaps for wear, damage and adjustment.
4.
Check all systems for leaks.
5.
Charge and service motive power batteries.
6.
Check squeegees for damage.