Nilfisk Alto 2000 User Manual

Page of 157
1 - 24
    AMERICAN-LINCOLN TECHNOLOGY
        SMART 2000
SERVICE CHART
SERVICE CHART
Check items for proper operation.  If service is required, please contact an authorized  American-Lincoln
Technology distributor.  For best performance, replace worn parts with genuine American-Lincoln Technology
parts.
EVERY eight (8) HOURS or DAILY check and clean/adjust if necessary:
1
Inspect panel filters for damage and clean them.
2
Inspect and clean hopper.
3
Inspect and clean recovery tank screens and filters.
4
Check hydraulic fluid level.
5
Check all flaps for wear or damage.
6
Check brooms for wear or damage, adjust as required.
7
Check brake pedal and parking brake.
8
Check hydraulic oil filter.
9
Check battery electrolyte level.
10 Check all fluid system components for leaks.
50 HOUR (WEEKLY) MAINTENANCE CHECKLIST
11 Check solution tank (recycling or ESP system).
12 Check solution filter screen (recycling or ESP system).
13 Check recovery tank.
14 Check recovery tank screens and filters.
15 Inspect scrub brushes for wear or damage.
16 Inspect rear and side squeegees for wear or damage.
17 Check battery electrolyte level.
18 Check all hydraulic hoses for wear or cuts.
19 Rotate main brush (end over end).
20 Clean or replace panel filters.
21 Lubricate squeegee casters.
22 Clean throttle rod springs
100 HOUR MAINTENANCE CHECKLIST
23 Lubricate drive wheel, swivel wheel bearings, and steering rack guide (engine side above rear wheel).
24 Lubricate front wheel bearings.
25 Lubricate all moving joints.
26 Check brake shoes for wear and adjust accordingly.
27 Lubricate all bushings with  anti-seize lubricant. The bushings are located on the steering,
scrub deck lift, and squeegee lift
250 HOUR MAINTENANCE CHECKLIST
28 Lubricate squeegee casters.
29 Clean solution tank and filter screen.
30 Replace hydraulic filter element.
31 Clean hydraulic reservoir.