Nilfisk Alto 2000 User Manual
1 - 26
AMERICAN-LINCOLN TECHNOLOGY
SMART 2000
HELPFUL HINTS FOR CLEANING OPERATION
WARNING
Do not turn the steering wheel sharply when the machine is in motion. The machine is very responsive to
movement of the steering wheel. Do not make sudden turns. Scrub in straight paths. Do not bump posts. Do
not scrape the sides of the machine.
1.
Plan your sweeping and scrubbing in advance. Try to arrange long runs with minimum stopping and
starting. Sweep debris from narrow aisles out into main aisles ahead of time. Do an entire floor or
section at one time.
starting. Sweep debris from narrow aisles out into main aisles ahead of time. Do an entire floor or
section at one time.
2.
Pick up oversize debris before sweeping.
3.
Allow a few inches of overlap of sweep and scrub paths. This will eliminate leaving dirty patches.
4.
Do not turn steering wheel too sharply when the machine is in motion. The machine is very responsive
to movement of the steering wheel, so avoid sudden turns.
to movement of the steering wheel, so avoid sudden turns.
5.
Try to follow as straight a path as possible. Avoid bumping into posts or scraping the sides of the
machine.
machine.
6.
Always allow the machine to warm up before operating in cold temperatures.
7.
Periodically turn the sweeping broom end-over-end to prevent the bristles from “setting” in one direction.
NOTE
Replace the sweeping broom when the bristles are worn to 3 inch (8 cm) length. Replace disc brushes when
bristles are reduced to ½ inch (1.3 cm) in length. Replace squeegee rubbers when all usable edges have
become rounded with wear, impairing the wiping action.
P4134/0001
SIDE AISLES
MAIN AISLE
SIDE AISLES
Figure 24