Panasonic MC-V9626 User Manual
- 13 -
- 40 -
TO CHECK BRUSHES:
➢
➢ When brushes are worn to the level
of the base support bar, replace the
agitator.
agitator.
TO REPLACE BRUSH AGITATOR
UNIT
UNIT
➢
➢ Remove POWER NOZZLE cover,
belt and agitator assembly. (See
“REMOVING BELT”).
“REMOVING BELT”).
➢
➢ Remove agitator supports,
washers, screws, end brush, brush
sprocket, and brush sprocket
flange from ends of agitator
assembly.
sprocket, and brush sprocket
flange from ends of agitator
assembly.
➢
➢ Replace agitator assembly.
➢
➢ Reassemble agitator assembly.
➢
➢ To line up screw holes in dowel,
sprocket and end brush, be sure the
brush portion of end brush lines up
with brushes on brush dowel.
brush portion of end brush lines up
with brushes on brush dowel.
➢
➢ Replace belt, agitator assembly and
POWER NOZZLE cover screws.
(See “REPLACING BELT”).
(See “REPLACING BELT”).
Base Support Bars
Barres de support
de la base
Electrical Shock Or Personal Injury
Hazard
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly starting.
servicing or cleaning the unit.
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly starting.
WARNING
Brush Servicing
Overload
Tools-
POWER
Protector Headlight
On-Board
Cord
Length
Cord
Reel
120V. AC (60Hz)
Yes
Yes
Yes
20 Ft. (6.1 m)
Yes
12.0 A
Protector
Almacen-
contra
Extensión
amiento
Voltaje
subrecargas
Luz
Herramientas
de cordón
del cordón
120V. AC (60Hz)
Si
Si
Si
6,1 m (20 pi)
Si
12,0 A
Protecteur
Dispositif
Longueur
Rappel
Alimentation
de surcharge
d’éclairage
Accessoires
du cordon
du cordon
120 V c.a. (60 Hz)
Oui
Oui
Oui
6,1 m (20 pi)
Oui
12,0 A
FEATURE CHART
Diagrama de características
Tableau des caractéristiques