Janome 15000 User Manual

122

You can check the size of the embroidery area by tracing 
the pattern outline without stitching or with basting 
stitches.
Press the trace key and the trace option window will 
open.
  q Trace key

q

w

The following 3 options are available:
1.  Trace without stitching
Press the        key to open the trace without stitching 
window.
Press the trace key       to start tracing or press one of 
the                      keys to move the hoop to a corner.

2.  Trace and baste (single)
Press the       key to open the trace and baste (single) 
window.
Press the start/stop button to start tracing with basting 
stitches.
3.  Trace and baste (double)
Press the       key to open the trace and baste (double) 
window.
Press the start/stop button to start tracing with basting 
stitches. First, the machine bastes inside the pattern then 
traces the pattern outline with basting stitches.

NOTE:
The machine will baste around the embroidery area 
with a 5 mm allowance.
However, the allowance will be null if the pattern 
spreads over the maximum limit of embroidery area.
To close the tracing option window, press the X key.

Hoop back key
Raise the needle by pressing the needle up/down key, if 
the needle is in down position.
Press the hoop back key

w and hoop back option 

window will open. 
Press the       key and the confirmation window open. 
Press the OK to move the carriage back to the home 
position and return to the Ready to Sew screen. Press 
one of the                keys to move the carriage to a 
standby position.
Press the X key to close the hoop back option window.
  w  Hoop back key

The hoop will go back to the original position when 
pressing the start/stop button.