Janome 15000 User Manual
123
• Embroidery foot height
Press one of the fabric icon keys to select the
recommended height or press the “+” or “–” key to fine
tune the foot height.
w Plain fabric key
e Quilting key
Press one of the fabric icon keys to select the
recommended height or press the “+” or “–” key to fine
tune the foot height.
w Plain fabric key
e Quilting key
Press the OK key to activate the new settings.
To return to the default settings, press the default key.
r Default key
To return to the default settings, press the default key.
r Default key
• Cutting the tails of jump threads
This option is can be used when the “jump thread cutting
length” setting or “cutting command“ is activated (refer to
page 153).
Press the “+” or “–” key to adjust the tail length of jump
thread.
This option is can be used when the “jump thread cutting
length” setting or “cutting command“ is activated (refer to
page 153).
Press the “+” or “–” key to adjust the tail length of jump
thread.
Adjust Key
Press the adjust key to open the manual setting window.
You can adjust the following settings in this window.
q Adjust key
Press the adjust key to open the manual setting window.
You can adjust the following settings in this window.
q Adjust key
q
t
• Auto thread tension level
Press the “+” or “–” key to adjust the thread tension to
your preference.
Press the “+” or “–” key to adjust the thread tension to
your preference.
w
e
r
Embroidery mode key
Press this key to open the embroidery mode window.
t Embroidery mode key
Press this key to open the embroidery mode window.
t Embroidery mode key