Panasonic SC-HTB690 User Manual

Page of 40
Precautions
SQT0852
3
Caution for AC Mains Lead
(For the AC mains plug of three 
pins)
For your safety, please read the following text 
carefully.
This appliance is supplied with a moulded three 
pin mains plug for your safety and convenience.
A 10-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please 
ensure that the replacement fuse has a rating of 
10-ampere and that it is approved by ASTA or 
BSI to BS1362.
Check for the ASTA mark Ï or the BSI mark Ì 
on the body of the fuse.
If the plug contains a removable fuse cover you 
must ensure that it is refitted when the fuse is 
replaced.
If you lose the fuse cover the plug must not be 
used until a replacement cover is obtained.
A replacement fuse cover can be purchased 
from your local dealer.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the 
type of AC mains plug (figures A and B). 
Confirm the AC mains plug fitted and follow the 
instructions below.
Illustrations may differ from actual AC mains 
plug.
1. Open the fuse cover with a screwdriver.
2. Replace the fuse and close or attach the fuse 
cover.
Figure A
Figure B
Fuse cover
Figure A
Figure B
Fuse
(10 ampere)
Fuse
(10 ampere)
About descriptions in these operating instructions
≥ Pages to be referred to are indicated as “> ±±”.
≥ Labels on this unit and the remote control are indicated as [±±] in these operating instructions.
≥ The illustrations shown may differ from your unit.
≥ These operating instructions are applicable to model SC-HTB690 for variety of regions. Unless otherwise indicated, 
illustrations in these operating instructions are of the model for the United Kingdom and Ireland.
≥ Operations in this operating instructions are described mainly with the remote control, but you can perform the operations 
on the main unit if the controls are the same.
SC-HTB690-SQT0852.book  3 ページ  2015年1月30日 金曜日 午後2時2分