Sony CDX-CA760X Manual

Page of 92
19
E:\DATA\01_18\876173S CDX-CA760X 
(U)\3228169111\322816911CDXCA750U\01US02CD-U.fm
masterpage:Right
CDX-CA760X/CA750X
3-228-169-11(1)
• A.Scrl (Auto Scroll)
– Select “on” to scroll all automatically 
displayed names exceeding 8 characters.
– When Auto scroll is set to off and the disc/
track name is changed, the disc/track name 
does not scroll.
Sound
• HPF (High pass filter) — to select the cut-off 
frequency to “off,” “78 Hz,” or “125 Hz.”
• LPF (Low pass filter) — to select the cut-off 
frequency to “78 Hz,” “125 Hz,” or “off.”
• Loud (Loudness) — to enjoy bass and treble 
even at low volumes. The bass and treble will 
be reinforced.
Play Mode
• Local on/off (Local seek mode) (page 14)
– Select “on” to only tune into stations with 
stronger signals.
• Mono on/off* (Monaural mode) (page 14)
– Select “on” to hear FM radio/TV stereo 
broadcast in monaural. Select “off” to return 
to normal mode.
• IF Auto/Wide (page 14)
*
This function cannot change the TV sound setting if 
the optional TV tuner XT-40V is connected. 
1
Press 
(MENU)
To set A.Scrl, press (MENU) during CD/MD 
playback.
2
Press either side of 
(DISC/PRESET)
 
repeatedly until the desired item 
appears.
3
Press the (+) side of 
(SEEK)
 to select 
the desired setting (Example: “on” or 
“off”).
4
Press 
(ENTER)
.
After the mode setting is completed, the 
display returns to normal play mode.
Note
The displayed item will differ depending on the source.
Tip
You can easily switch among categories by pressing 
either side of 
(DISC/PRESET)
 for 2 seconds.
Setting the equalizer
You can select an equalizer curve for seven 
music types (Vocal, Club, Jazz, New Age, Rock, 
Custom, and Xplod).
You can store and adjust the equalizer settings 
for frequency and level.
Selecting the equalizer curve
1
Press 
(SOURCE)
 to select a source 
(radio, CD, MD, or TV).
2
Press 
(EQ7)
 repeatedly until the 
desired equalizer curve.
Each time you press (EQ7), the item 
changes.
To cancel the equalizing effect, select “off.” 
After 3 seconds, the display returns to the 
normal playback mode.
Adjusting the equalizer curve
1
Press 
(MENU)
.
2
Press either side of 
(DISC/PRESET)
 
repeatedly until “EQ7 Tune” appears, 
then press 
(ENTER)
.
3
Press either side of 
(SEEK)
 to select 
the desired equalizer curve, then 
press 
(ENTER)
.
Each time you press (SEEK), the item 
changes.
4
Select the desired frequency and level.
1
Press either side of 
(SEEK)
 to select 
the desired frequency.
Each time you press (SEEK), the 
frequency changes.
62 Hz
 
157 Hz
 
396 Hz
 
1.0 kHz
 
2.5 kHz
 
6.3 kHz
 
16 kHz
continue to next page 
t