McIntosh MVP871 User Manual

Note: If there is a Disc playing in the MVP871 press

the STOP Push-button twice before pressing the

SETUP Push-button.

2. Use the Down directional Push-button on the Re-

mote Control to select the COMPONENT VIDEO

OUT Menu.

Refer to

figure 30.

CAUTION: DO NOT use the MVP871 DVD Player’s

Progressive Video Display Mode unless you

are certain the TV/Monitor connected to the

MVP871’s Componet Video Output jacks is

capable of displaying a Progressive Scan

Signal. Failure to do so could result in pos-

sible damage to the TV/Monitor. If you are

not sure about the capability of the TV/Moni-

tor connected to the MVP871 Component

Video Output, refer to the Owner’s Manual

supplied with the set and/or contact your

McIntosh Dealer for assistance. In order

to switch the MVP871 Component Video

Output to the Interlace Mode (non Progres-

sive Scan), the MVP871 will first have to be

connected to a TV/Monitor having either

Progressive Scan capability or can except

either S-Video or Composite Video Signals.

3. To change from the default setting use the Right

directional Push-button followed by Up or Down

directional Push-buttons and then press the SELECT

Push-button.

Note: The title of the icon button-bar will change color

from yellow (the cursor color) to blue indicating

the selected item. Not all High definition TV/Moni-

tor sets are fully compatible with the MVP871 and

may cause artifacts to be displayed in the picture.

In the case of Progressive Scan picture problems,

it is recommened to switch off the Progressive

Scan feature in the MVP871 and instead use the

built-in Progressive Scan feature of the TV/moni-

tor. For additional information please contact your

McIntosh Dealer.

SETUP, con’t

press the Right directional Push-button to select the

Video Menu Icon Tab. Refer to figure 24.

Note: If there is a Disc playing in the MVP871 press

the STOP Push-button twice before pressing the

SETUP Push-button.

2. Use the Down directional Push-button on the Re-

mote Control to select the TV TYPE Menu. Refer to

figure 29.

3. To change from

the default

setting use the

Right direc-

tional Push-

button fol-

lowed by Up

or Down

directional

Push-buttons

and then press

the SELECT

Push-button.

Note: The title of the icon button-bar will change color

from yellow (the cursor color) to blue indicating

the selected item.

4. Return to the Video Setup Menu by pressing the Left

followed by the Up directional Push-buttons.

5. Next continue to the COMPONENT VIDEO OUT

Settings. If no other changes are to be made in Setup

Mode at this time, exit by pressing the RTRN (Return)

Push-button.

Note: The SETUP Push-button may also be pressed to

exit the setup mode.

Component Video Out

This selects the video signal format available at the Com-

ponent Video Jacks to match the capabilities of the con-

nected TV/Monitor. To change from the default setting of

Progressive perform the following steps:

Note: The Progressive Scan Circuitry in the MVP871 of-

fers the highest possible analog video picture quality

available when the Component Video Outputs of the

MVP871 are connected to a TV/Monitor capable of

Progressive Scan. Unlike a conventional TV with Odd

and Even Scanning Lines that are interlaced together

to form a picture, the Progressive Scanning Mode

scans all the lines of picture information both Odd

and Even at one time, non-interlaced.

1. Press the SETUP Push-button on the Remote Control

to access the Language Setup Menu. Then press the

Right directional Push-button to select the Video

Setup Menu Icon Tab. Refer to figure 24.

Figure 29

Figure 30