McIntosh MVP871 User Manual

Up or Down directional Push-buttons to select one

of two other presets (Interlaced or HDMI) followed by

pressing the SELECT Push-button. If a different delay

value is needed, use the Up or Down directional

Push-buttons to

select OTHER

followed by

the SELECT

Push-button.

Use the Up or

Down direc-

tional Push-but-

tons to enter

the offset delay

value followed

by the SELECT

Push-button. Refer to figure 32.

Note: The title of the icon button-bar will change color

from yellow (the cursor color) to blue indicating

the selected item.

4. Return to the Video Setup Menu by pressing the Left

followed by the Up directional Push-buttons.

5. Next continue to the SQUEEZE MODE Settings. If

no other changes are to be made in Setup Mode at this

time, exit by pressing the RTRN (Return) Push-button.

Note: The SETUP Push-button may also be pressed to

exit the setup mode.

Squeeze Mode

When the MVP871 is connected to a TV/Monitor with ei-

ther a Component Video or HDMI connection and the TV

Aspect Ratio is set to 16:9 and a video source with an As-

pect Radio of 4:3 is displayed, the image will be stretched

out. The Squeeze Mode will compensate by displaying the

4:3 image in the center of the screen. The default setting is

Off with additional choices of On or Auto. To change from

the default setting perform the following steps:

1. Press the SETUP Push-button on the supplied Remote

Control to access the Language Setup Menu. Then

press the Right directional Push-button to select the

Video Menu Icon Tab. Refer to figure 24.

Note: If there is a Disc playing in the MVP871 press

the STOP Push-button twice before pressing the

SETUP Push-button.

2. Use the Down directional Push-button on the Re-

mote Control to select the SQUEEZE MODE Menu.

Refer to figure 33

3. To change from the default setting use the Right

directional Push-button followed by Up or Down

directional Push-buttons and then press the SELECT

Push-button.

Video Setup, con’t

4. Return to the Video Setup Menu by pressing the Left

followed by the Up directional Push-buttons.

5. Next continue to the AUDIO/VIDEO SYNC Settings.

If no other changes are to be made in Setup Mode at

this time, exit by pressing the RTRN (Return) Push-

button.

Note: The SETUP Push-button may also be pressed to

exit the setup mode.

Audio/Video Sync

Due to the difference in the amount of time it takes for the

processing of the Video and Audio signals, they can be

out of synchronization which is especially noticeable with

dialog. The MVP871 allows for the correction of any loss

of sync. There are separate settings for HDMI (Digital

Video), Analog Video (both Interlaced and Progressive

Scan modes) and OTHER which is a variable setting with

an offset delay 0-200ms. The variable delay is useful when

multiple video connections such as Interlaced, Progressive

and Digital are all used simultaneously. The default setting

is Analog Progressive Scan Video. To change from the

default setting perform the following steps:

1. Press the SETUP Push-button on the supplied Remote

Control to access the Language Setup Menu. Then

press the Right directional Push-button to select the

Video Menu

Icon Tab. Refer

to figure 24.

Note: If there

is a Disc

playing

in the

MVP871

press

the

STOP

Push-

button twice before pressing the SETUP Push-but-

ton.

2. Use the Down directional Push-button on the Re-

mote Control to

select the AU-

DIO/VIDEO

SYNC Menu.

Refer to figure

31.

3. To change from

the default

setting use the

Right direc-

tional Push-but-

ton followed by

Figure 31

Figure 32

Figure 24