Kärcher 600 LP User Manual

10

Version 06/05

The metered addition is carried out dependent of 
the level in the metering container.

• Fill 10 l of drinking water into the metering con-

tainer.

• With a measuring cup, measure the 7.5 -fold 

amount mentioned in the “10 Liter Water” col-
umn of the respective chemical and fill into the 
container.

• Fill the container with drinking water to the “75 

l” mark and mix according to Section 3.1.2.

• Read off the level of the fluid with help of the 

scale at the metering container, e. g., 35 l.

• Determine the quantity to be refilled by sub-

tracting the read level from the 75 l. 
Example: 75 l - 35 l = 40 l.

• Determine the required amount of the respec-

tive chemical from the metering table. 
Example: 4 x the amount for 10 l water.

• Measure the determined amount of the respec-

tive chemical and fill into the container.

• Refill amount of water to the “75 l” mark and 

mix in accordance with Section 3.1.2.

• Switch the main switch (20) to the “O” position; 

the equipment stops the drinking water produc-
tion.

For mixing of the chemical, only un-
chlorinated drinking water may be 
used. 
This water is taken from the drinking 
water sampling valve (44).

If the equipment is not operated for 
periods exceeding 14 days, it must be 
preserved by the Kärcher Service.
Otherwise permanent damage must be 
expected.

Never switch off the equipment over-
night! Otherwise the automatic clean-
ing of the pre-filter is not carried 
through. Danger of damage to the 
equipment is given!

Product

Item No.

RM 852 sterilization agent 24 kg

6.291-772.0

Chlorinated lime 6 x 870 g

6.291-505.0

RM 5000 hardness stabilizer 23 kg

6.290-991.0

RM 5001 flocculation agent 10 l

6.294-703.0

RM 5001 flocculation agent 60 l

6.294-716.0

Filter element 5µ

6.414-466.0