Yamaha HTR-6180 User Manual

START PAIRING

Use this feature to start pairing the connected Yamaha 
Bluetooth adapter (such as YBA-10, sold separately) with 
your Bluetooth component. For details about the pairing, 
refer to “Pairing the Bluetooth™ adapter and your 
Bluetooth component” on page 72.

Press 8

ENTER to start pairing. 

The connected Bluetooth adapter starts searching 
Bluetooth components. “Searching...” appears in the 
video monitor.

Check that the Bluetooth component detects 
the Bluetooth adapter.
If the Bluetooth component the Bluetooth adapter, 
“YBA-10 YAMAHA” (example) appears in the 
Bluetooth device list.

Select the Bluetooth adapter in the Bluetooth 
device list and then enter the pass key 
“0000” on the Bluetooth component. 
Once this unit completes the pairing successfully, 
“Pairing completed” appears.

y
To cancel the pairing, press 9RETURN to exit from 
“START PAIRING”.

Press 9

RETURN to exit from “START 

• If the connected Bluetooth adapter cannot find any Bluetooth 

components, “Not found” appears.

• If a Bluetooth adapter is not connected to this unit, “No 

Bluetooth Adapter” appears.

BGV

Use this feature to select the video source played in the 
background of the sources input at the MULTI CH INPUT 
jacks.

INPUT CH

Use this setting to select the number of channels input 
from an external decoder (see page 25).
Choices: 6CH, 8CH

If the connected component outputs discrete 
6-channel audio signals.
Select “6CH”.

If the connected component outputs discrete 
8-channel audio signals.
Select “8CH”. Also set “FRONT” (see below) to the 
analog audio jacks at which the front left and right 
channel signals output from the connected component 
are input.

FRONT

If you selected “8CH” in “INPUT CH”, you can select the 
analog audio jacks at which the front left and right channel 
signals output from the connected external decoder is 
input.
Choices: CD, MD/CD-R, DVD, DTV/CBL, DVR, VCR, 

V-AUX

“FRONT” parameter appears only when you set “INPUT CH” to 
“8CH”.

To ensure security, a time limit of 8 minutes is set for 
the pairing operation. You are recommended to read 
and fully understand all the instructions before starting.

[]/[]:
[ENTER]:

[

p

N) MULTI CH

INPUT RENAME

VOL. TRIM;;;;;0.0dB

BGV;;;;;;;;;;;;LAST

INPUT CH;;;;;;;;6CH

Up/Down

Select

.

Automatically selects the last selected video 
source as the background video source.

DVD, DTV/
CBL, DVR, 
VCR, V-AUX

Selects the corresponding input source as the 
background video source.

OFF

Does not play the video source in the 
background.

[]/[]:
[ENTER]:

[

p

N) MULTI CH

INPUT RENAME

VOL. TRIM;;;;;0.0dB

BGV;;;;;;;;;;;;LAST

INPUT CH;;;;;;;;6CH

Up/Down

Select

.

[]/[]:
[ENTER]:

[

p

N) MULTI CH

INPUT RENAME

VOL. TRIM;;;;;0.0dB

BGV;;;;;;;;;;;;LAST

INPUT CH;;;;;;;;8CH

FRONT;;;;;;;;;;;DVD

Up/Down

Select

.