Yamaha HTR-6180 User Manual

Use this menu to adjust the optional system parameters.

■ Display settings

A)DISPLAY SET

Use “VIDEO” of “INIT” in “ADVANCED SETUP” to set “OSD 
SHIFT” to the factory presets (see page 112).

DIMMER

Use this feature to adjust the brightness of the front panel 
display.
Control range: – 4 to 0
Control step: 1
• Press 8l to make the front panel display dimmer.
• Press 8h to make the front panel display brighter.

OSD SHIFT

Use this feature to adjust the vertical position of the OSD.
Control range: –5 (downward) to +5 (upward)
Control step: 1
Initial setting: 0
• Press 8l to lower the position of the OSD.
• Press 8h to raise the position of the OSD.

OSD-SOURCE

Use this feature to set the amount of time to display the 
HD Radio (U.S.A. model only), XM Satellite Radio, or 
SIRIUS Satellite Radio information or iPod menu in the 
OSD after you perform a certain operation.

OSD-AMP

Use this feature to set the amount of time to display the 
status information screen after you perform a certain 
operation.

FL SCROLL

Use this feature to set the mode to display the HD Radio 
(U.S.A model only), XM Satellite Radio information, 
SIRIUS Satellite Radio information, or iPod menu (such 
as song title or channel name) in the front panel display.

■ Video settings

B)VIDEO SET

Use “VIDEO” of “INIT” in “ADVANCED SETUP” to set the 
parameters in “VIDEO SET” to the factory presets (see 
page 112).

VIDEO CONV.

Use this feature to set whether to convert the video signals 
input at the VIDEO, S VIDEO, and COMPONENT 
VIDEO jacks.

ON

Displays the OSD unceasingly during an 
operation.

10S

Turns off the OSD 10 seconds after you perform 
a certain operation.

Turns off the OSD 30 seconds after you perform 
a certain operation.

[]/[]:
[ENTER]:

[

p

5 OPTION MENU

A)DISPLAY SET

B)VIDEO SET

C)MEMORY GUARD

D)INIT. CONFIG

E)HDMI SET

F)ZONE2 SET

Up/Down

Enter

.

[]/[]:
[

p]/[[]:

[

p

A)DISPLAY SET

DIMMER;;;;;;;;;;;;0

OSD SHIFT;;;;;;;;+5

OSD-SOURCE;;;;;;30S

OSD-AMP;;;;;;;;;30S

FL SCROLL;;;;;;CONT

Up/Down

Adjust

.

ON

Displays the OSD unceasingly during an 
operation.

10S

Turns off the OSD 10 seconds after you perform 
a certain operation.

Turns off the OSD 30 seconds after you perform 
a certain operation.

Continuous mode.
Select this to display the operation status in the 
front panel display in a continuous manner.

ONCE

Scroll-once mode.
Select this to display the operation status in the 
front panel display by the first 14 alphanumeric 
characters after scrolling all characters once.

Converts composite, S-video, and component 
video signals interchangeably and up-converts 
composite, S-video, and component video 
signals to HDMI video signals.

OFF

Does not convert any signals.

[]/[]:
[

p]/[[]:

[

p

B)VIDEO SET

VIDEO CONV.;;;;;;ON

HDMI RES.;;;;*THRGH

Up/Down

Select

.