Yamaha HTR-6180 User Manual

■ Automatic station preset

You can use the automatic preset tuning feature to store up 
to 40 FM stations with strong signals (A1 to E8: 8 preset 
station numbers in each of the 5 preset station groups) in 
order.

(U.S.A. model only) 
You can use the automatic preset tuning feature to store up 
to 40 AM HD Radio, FM HD Radio, and analog FM radio 
stations with strong signals.

Rotate the R

INPUT selector (or press 

4

TUNER) to select “TUNER” as the input 

Press C

BAND (or 7BAND) to select the 

desired reception band.
“FM” or “AM” appears in the front panel display. 
This unit searches the stations in the selected band 
and then another band.

Press C

BAND (or 7BAND) to select “FM” 

as the reception band.
“FM” appears in the front panel display.

Press and hold F

MEMORY (or 

9

MEMORY) for more than 3 seconds.

The preset station number as well as the MEMORY 
and AUTO indicators flashes. After approximately 5 
seconds, automatic presetting starts from the current 
frequency and proceeds toward higher frequencies.

When automatic preset tuning is completed, the 
MEMORY indicator disappears.

y
• You can specify the preset number from which this unit stores 

FM stations. Press DA/B/C/D/E (or 8A-E/CAT. l / h) and 
then EPRESET/TUNING/CH l / h 
(or 8PRESET/CH k / n) repeatedly after you perform step 3 
to select the preset station number under which the first station 
will be stored.

• To cancel the automatic station preset, press FMEMORY (or 

9MEMORY) again.

• (U.S.A. model only)

When this unit stores the FM HD Radio stations with this 
feature, this unit stores only the main audio program of the 
stations (HD1). When you want to store the sub-audio programs 
of the FM HD Radio stations, preset the stations manually.

• Any stored station data existing under a preset station number is 

cleared when you store a new station under the same preset 
station number.

• If the number of received stations does not reach 40 (E8), 

automatic preset tuning automatically stops after searching for 
all the available stations and copy the stored stations to the rest 
preset station numbers.

• (Canada model only) 

Only FM stations with sufficient signal strength are stored 
automatically by automatic preset tuning. If the station you 
want to store is weak in signal strength or an AM radio station, 
tune into it manually and store it as described in “Manual 
station preset” below.

■ Manual station preset

Use this feature to store the AM or FM stations with weak 
signals manually.

(U.S.A. model only) 
You can store the analog AM/FM radio stations and AM/
FM HD Radio stations manually, and you can also store 
the sub-audio programs of FM HD Radio station.

Tune into a station.
See page 53 for tuning instructions.

y
(U.S.A. model only) 
To store a sub-audio program of the HD Radio station (HD2 
to HD8), press 0PRG SELECT

 b / a repeatedly to 

select the desired audio program (see page 57). 

Press F

MEMORY (or 9MEMORY).

The MEMORY indicator flashes in the front panel 
display for approximately 30 seconds.

y
To cancel the preset memory mode, press FMEMORY (or 
9MEMORY) again.

A1:FM 88.9MHz