Yamaha HTR-6180 User Manual

Press E

PRESET/TUNING/CH l / h (or 

8

PRESET/CH k / n) repeatedly to select a 

• Press Eh (or 8k) to select a higher preset 

station group and number.

• Press El (or 8n) to select a lower preset station 

group and number.

y
You can select the preset station group (A to E) by pressing 
DA/B/C/D/E (or 8A-E/CAT. l / h) repeatedly.

Press F

MEMORY (or 9MEMORY) while 

the MEMORY indicator is flashing.
The station band and frequency appear in the front 
panel display with the preset station group and 
number you have selected. The MEMORY indicator 
disappears from the front panel display.

• Any stored station data existing under a preset station number is 

cleared when you store a new station under the same preset 
station number.

• The reception mode (stereo or monaural) is stored along with 

the station frequency.

■ Exchanging preset stations

You can exchange the assignments of two preset stations 
with each other. The example below describes the 
procedure to exchange preset station “E1” with “A5”.

Select preset station “E1” using D

A/B/C/D/E 

and E

PRESET/TUNING/CH l / h.

Press and hold B

EDIT for more than 3 

seconds.
“E1” and the MEMORY indicator flash in the front 
panel display.

Select preset station “A5” using D

A/B/C/D/E 

and E

PRESET/TUNING/CH l / h.

“A5” and the MEMORY indicator flash in the front 
panel display.
See “Using station preset feature” on page 54.

Press B

EDIT again.

“EXCHANGE E1-A5” appears in the front panel 
display and the assignments of the two preset stations 
are exchanged.

A1:FM 88.9MHz

Before performing the following operations, set the operation 
mode selector on the remote control to FSOURCE and then 
press 4TUNER.

E1:FM 88.9MHz

A5:FM 88.9MHz