Yamaha RX-SL100RDS User Manual

■

■

Connect your speaker system to these terminals.

■

Connect surround speakers to these terminals.

■

Connect a surround back speaker to these terminals.

■

Connect a center speaker to these terminals.

■

Connect a subwoofer with built-in amplifier, such as the 
YAMAHA Active Servo Processing Subwoofer System, 
to this jack.

y

You can easily distinguish between the cable pairs by attaching a 
supplied cable tag to each end of the respective speaker cable (see 
page 9).

• The cut-off frequency for the SUBWOOFER jack is 90 Hz.
• If you are not using a subwoofer, allocate the signals to the front 

left and right speakers by changing the setting item “LFE/Bass 
Out” to FRONT on the SOUND menu.

• Use the control on the subwoofer to adjust its volume level. You 

can also adjust the volume level using this unit’s remote control 
(see page 36).

Ω

R

1

2

3

L

R

L

–

+

–

+

• The surround back speaker outputs the surround back channel included in Dolby Digital EX and DTS-ES software and only 

operates when the Dolby Digital EX or DTS-ES decoder is turned on.

7

1

2

6

5

4

3

01EN.00_RX-SL100RDS.book  Page 11  Thursday, November 27, 2003  12:42 PM