Yamaha RX-SL100RDS User Manual

Do not connect this unit or other components to the mains power until all connections between components are complete.
• Make sure that all connections are made correctly - that is to say, L (left) to L, R (right) to R, “+” to “+” and “–”

 

to “–”. Some components require different connection methods and have different jack names. Refer to the operating 
instructions for each component you wish to connect to this unit.

• After you have completed all connections, check them again to make sure they are correct.
• The jack names correspond to the names on the input selector.

■

Connect one end of the SCART cable to the TV/IN OUT connector on this unit and the other end to the SCART 
connector on your TV.

■

Connect one end of the SCART cable to the EXT. IN/OUT connector on this unit and the other end to the SCART 
connector on your AV component. You can also daisy chain several SCART components together as shown in “Digital 
audio connections” (page 13).

Use a SCART cable to make the above connections. The SCART cable, or “Euro AV cable”, supports IN/OUT signal transmission, 
providing you with the best possible picture and sound.

Ω

R

1

2

3

L

R

L

–

+

–

+

01EN.00_RX-SL100RDS.book  Page 12  Thursday, November 27, 2003  12:42 PM