Yamaha RX-V561 User Manual

Page of 86
PLAYBACK
32
 En
1
Turn on the video monitor connected to this 
unit.
2
Press D
INPUT l / h repeatedly (or press 
one of the input selector buttons (
C)) to 
select the desired input source.
The name of the currently selected input source 
appears in the front panel display for a few seconds.
3
Start playback on the selected component or 
select a broadcast station.
• Refer to the operating instructions for the source 
component.
• See page 40 for details about FM/AM tuning 
instructions.
4
Rotate 8
VOLUME (or press RVOLUME +/–
to adjust the volume to the desired output 
level.
5
Press A
PROGRAM l / h (or press DAMP 
and then J
PROG l / h) repeatedly to 
select the desired sound field program.
The name of the selected sound field program appears 
in the front panel display.
See page 37 for details about sound field programs.
• Choose a sound field program based on your listening 
preference, not merely on the name of the program.
• When you select an input source, this unit automatically 
selects the last sound field program used with the 
corresponding input source.
• Sound field programs cannot be selected when the 
component connected to the MULTI CH INPUT jacks is 
selected as the input source (see page 33).
• When PCM signals with a sampling frequency higher than 
48 kHz are input, this unit is automatically set to the 
“STRAIGHT” mode (see page 38).
• To display information about the currently selected input 
source in the OSD, see page 35 for details.
■ A quick guide to contents
Playback
Caution
Extreme caution should be exercised when you play 
back CDs encoded in DTS. If you play back a CD 
encoded in DTS on a DTS-incompatible CD player, 
you will only hear some unwanted noise that may 
damage your speakers. Check whether your CD player 
supports CDs encoded in DTS. Also, check the sound 
output level of your CD player before you play back a 
CD encoded in DTS.
Basic operations
INPUT:DVD
DVR
DVD
CD
V-AUX
DTV/CBL
MD/CD-R
TUNER
USB
Currently selected input source
Available input source
Notes
When you want to...
See 
page
Enjoy pure hi-fi stereo sound
34
Adjust the tonal quality of the front speakers
34
Adjust the parameters of sound field programs
39
Enjoy the sources with a wide dynamic range at night
35
Use headphones
36
Select a decoder to play back sources with
38
Automatically set this unit to the standby mode
36
Movie Dramatic
Currently selected 
surround field program