Yamaha RX-V561 User Manual

■ Selecting the component connected to 

Press D

INPUT l / h repeatedly (or press 

A

MULTI CH IN) so that “MULTI CH” appears in 

y
Use “MULTI CH SET” menu in “INPUT MENU” to set the 
parameter for MULTI CH INPUT (see page 54).

• Sound field programs cannot be selected when the component 

connected to the MULTI CH INPUT jacks is selected as the 
input source. 

• When headphones are used, signals are output only from the 

front left and right channels.

■ Selecting the front speaker set

Use this feature to select the front speaker system 
(FRONT A or FRONT B).

Press 9

SPEAKERS on the front panel 

repeatedly to turn on or off the set of front 
speakers connected to the FRONT A or FRONT B 
speaker terminals.
The activate front speaker set changes as follows:

Turn off the volume level of this unit when you switch the front 
speaker setting.

■ Using the Zone B feature

When you set “FRONT B” to “ZONE B” (see page 48), 
you can use the speakers connected to the FRONT B 
speaker terminals in another room (Zone B).

Press 9

SPEAKERS on the front panel 

repeatedly to turn on or off the Zone B speakers.
When you activate the Zone B speakers, all the speakers in 
the main room are muted. 

• You cannot activate both the main room and Zone B speakers 

simultaneously.

• If you select CINEMA DSP sound field program and activate 

the Zone B speakers, Virtual CINEMA DSP activates 
automatically (see page 38).

■ Selecting audio input jacks 

This unit comes with a variety of input jacks. Use this 
feature (audio input jack select) to switch between input 
jacks when more than one input jack is assigned to the 
same input source.

y
• We recommend setting audio input jack select to “AUTO” in 

most cases.

• You can adjust the default audio input jack select of this unit by 

using “AUDIO SELECT” in “OPTION MENU” (see page 55).

Press E

AUDIO SELECT (or BAUDIO SEL) 

AUTO

Automatically selects input signals in the 
following order:
(1) Digital signals
(2) Analog signals

ANALOG

Selects only analog signals. If no analog 
signals are input, no sound is output.

This feature is not available when no digital input jacks are 
assigned to the currently selected input source.

A.SEL:AUTO