Yamaha RX-V363 User Manual

Press I

SPEAKERS repeatedly to select the 

front speakers you want to use.
The respective speaker indicators lights up in the 
front panel display.

Press N

INPUT l / h repeatedly (or press 

one of the input selector buttons (3)) to 
select the desired input source.
The name of the currently selected input source 
appears in the front panel display for a few seconds.

Start playback on the selected component or 
select a broadcast station.
• Refer to the operating instructions for the source 

component.

• See page 37 for details about FM or AM tuning 

instructions.

Rotate H

VOLUME (or press IVOLUME 

+/–) to adjust the volume to the desired 
output level.

Press K

PROGRAM l / h (or press 4AMP 

and then press 0

PROG l / h) repeatedly to 

select the desired sound field program.
The name of the selected sound field program appears 
in the front panel display.
See page 34 for details about sound field programs.

• Choose a sound field program based on your listening 

preference, not merely on the name of the program.

• When you select an input source, this unit automatically selects 

the last sound field program used with the corresponding input 
source.

• Sound field programs cannot be selected when the component 

connected to the MULTI CH INPUT jacks is selected as the 
input source (see page 30).

• When PCM signals with a sampling frequency higher than 48 

kHz are input, this unit is automatically set to the “STRAIGHT” 
mode (see page 36).

• To display information about the currently selected input source 

in the front panel display, see page 32 for details.

■ Guide to contents

Caution
Extreme caution should be exercised when you play 
back CDs encoded in DTS. If you play back a CD 
encoded in DTS on a DTS-incompatible CD player, 
you will only hear some unwanted noise that may 
damage your speakers. Check whether your CD player 
supports CDs encoded in DTS. Also, check the sound 
output level of your CD player before you play back a 
CD encoded in DTS.

INPUT:DVD

Adjust the tonal quality of the front speakers

31

Edit parameters of sound field programs

35

Enjoy the sources which have wide dynamic range at 
night

31

Use headphones

30

Select a decoder to play back sources with

35

Set this unit to the standby mode automatically

33

M o v i e D r a m a t i c

01EN_RX-V363_U.book  Page 29  Friday, December 7, 2007  5:44 PM

Black process 45.0° 240.0 LPI