Yamaha RX-V363 User Manual

■ Selecting audio input jacks 

This unit comes with a variety of input jacks. Use this 
feature (audio input jack select) to switch the input jack 
assigned to an input source when more than one jacks are 
assigned to an input source.

y

• We recommend setting audio input jack select to “AUTO” in 

most cases.

• You can adjust the default audio input jack select of this unit by 

using “AUDIO SELECT” in “OPTION MENU” (see page 50).

Press O

AUDIO SELECT (or press 4AMP and 

then C

AUDIO SEL) repeatedly to select the 

AUTO

Automatically selects input signals in the 
following order:
(1) Digital signals
(2) Analog signals

ANALOG

Selects only analog signals. If no analog 
signals are input, no sound is output.

This feature is not available when no digital input jack are 
assigned to the currently selected input source.

■ Selecting the night listening mode

The night listening modes are designed to improve 
listenability at lower volumes or at night.

Press 4

AMP and then press MNIGHT 

repeatedly to select “NIGHT:CINEMA” or 
“NIGHT:MUSIC”.
Choices: NIGHT:CINEMA, NIGHT:MUSIC, 

NIGHT OFF

• Select “NIGHT:CINEMA” to reduce the dynamic 

range of film soundtracks and make dialog easier to 
hear at lower volumes.

• Select “NIGHT:MUSIC” to preserve 

ease-of-listening for all sounds.

• Select “NIGHT OFF” if you do not want to use this 

feature.

y

When a night listening mode is selected, the NIGHT 
indicator lights up in the front panel display.

Press 7l / h to adjust the effect level while 
“NIGHT:CINEMA” or “NIGHT:MUSIC” is 
displayed in the front panel display.
Choices: MIN, MID, MAX
• Select “MIN” for minimum compression.
• Select “MID” for standard compression.
• Select “MAX” for maximum compression.

y

“NIGHT:CINEMA” and “NIGHT:MUSIC” adjustments are 
stored independently.

• You cannot use the night listening modes in the following cases:

– when the component connected to the MULTI CH INPUT 

jacks is selected as the input source.

– when headphones are connected to the PHONES jack.
– when the sampling frequency of the input sources are higher 

than 96 kHz.

• The night listening modes may vary in effectiveness depending 

on the input source and surround sound settings you use.

■ Adjusting the tonal quality

Use this feature to adjust the balance of bass and treble for 
the front left and right speaker channels.

Press J

TONE CONTROL repeatedly to select 

“BASS” or “TREBLE” and then press 
K

PROGRAM l / h to adjust the corresponding 

frequency response level.
Control range: –10 to +10 dB
Control step: 2
• Select “BASS” to adjust the low-frequency response.
• Select “TREBLE” to adjust the high-frequency 

response.

• Speaker and headphone adjustments are stored independently.
• If you increase or decrease the high-frequency or low-frequency 

sound to an extreme level, the tonal quality of the surround 
speakers may not match that of the front left and right speakers.

A.SEL:AUTO

01EN_RX-V363_U.book  Page 31  Friday, December 7, 2007  5:44 PM

Black process 45.0° 240.0 LPI