Yamaha RX-V363 User Manual

■ Adjusting speaker levels during 

You can adjust the output level of each speaker while 
listening to a music source.

This operation will override the level adjustment made in “SP 
LEVEL” (see page 46).

Press 4

AMP and then press 6LEVEL 

y

Once you press 6LEVEL on the remote control, you can 
also select the speaker by pressing 7k / n.

Press 7l / h on the remote control to 
adjust the speaker output level.
The control range is from –10 dB to +10 dB.

y

You can press DA/B/C/D/E to select a speaker and then 
EPRESET/TUNING l / h to adjust the speaker output level.

■ Displaying the signal information

You can display the format, sampling frequency, channel, 
bit rate and flag data of the current input signal.

Press 4

AMP and then press HMENU on 

the remote control.
“BASIC SETUP” appears in the front panel display.

;BASIC SETUP

Press 7k / n repeatedly to select “SIGNAL 
INFO” and then press 7

ENTER.

Press 7k / n to switch the displayed 
information.
The following information about the input source 
appears in the front panel display.

Press H

MENU to exit.

FRONT L

Front left speaker

FRONT R

Front right speaker

CENTER

Center speaker

SWFR

Subwoofer

SUR.L

Surround left speaker

SUR.R

Surround right speaker

Signal format.

The number of samples per second taken 
from a continuous signal to make a discrete 
signal.

The number of source channels in the input 
signal (front/surround/LFE).

The number of bits passing a given point 
per second.

Flag data encoded in DTS, Dolby Digital, 
or PCM signals that cue this unit to 
automatically switch decoders.

01EN_RX-V363_U.book  Page 32  Friday, December 7, 2007  5:44 PM

Black process 45.0° 240.0 LPI