Yamaha RX-V363 User Manual

Advanced setup

This unit has additional menus that are displayed in the
front panel display. The advanced setup menu offers
additional operations to adjust and customize the way this
unit operates. Change the initial settings (indicated in bold
under each parameter) to reflect the needs of your
listening environment.

• Only ASTANDBY/ON, KPROGRAM

l / h and

LSTRAIGHT are effective while you are using the advanced
setup menu.

• No other operations can be made while you are using the

advanced setup menu.

• The advanced setup menu is only available in the front panel

display.

Press A

STANDBY/ON on the front panel to

set this unit to the standby mode.

Press and hold J

TONE CONTROL and

then press A

STANDBY/ON to turn on this

unit.
This unit turns on, and the advanced setup menu
appears in the front panel display.

Press K

PROGRAM l / h to select the

parameter you want to adjust.
The name of the selected parameter appears in the
front panel display.

Press L

STRAIGHT repeatedly to change

the selected parameter setting.

Press A

STANDBY/ON to confirm your

selection and set this unit to the standby
mode.

The settings you made are reflected next time you turn on this
unit.

■ Speaker impedance

SP IMP.

(U.S.A. and Canada models only)

Use this feature to set the speaker impedance of this unit
so that it matches that of your speakers.
Choices: 8

ΩMIN, 6ΩMIN

• Select “8

ΩMIN” to set the speaker impedance to 8 Ω.

• Select “6

ΩMIN” to set the speaker impedance to 6 Ω.

■ Tuner frequency step

(Asia and General models only)

Use this feature to set the tuner frequency step according
to the frequency spacing in your area.
Choices: AM10/FM100, AM9/FM50
• Select “AM10/FM100” for North, Central and South

America.

• Select “AM9/FM50” for all other areas.

■ Initializing

PRESET

Use this feature to reset all the parameters of this unit to
the initial factory settings.
Choices: CANCEL, RESET
• Select “CANCEL” not to reset any parameters of this

unit.

• Select “RESET” to reset the parameters of this unit.

• This setting completely resets all the parameters of this unit

including the set menu parameters. However, the advanced
setup menu parameters will not be initialized.

• The initial factory settings are activated next time you turn on

this unit.

Advanced setup

Notes

SP IMP.

Speaker

Impedance level

ΩMIN

Front (A or B)

The impedance of each
speaker must be 8

Ω or

higher.

Center

Surround