Yamaha RX-V3900 User Manual

The macro programming feature makes it possible to 
perform a series of operations with the press of a single 
button. For example, when you want to play a CD, 
normally you would turn on the components, select the 
CD input, and press the play button to start playback. The 
macro programming feature lets you perform all of these 
operations simply by pressing the CD macro button. The 
buttons listed as macro buttons below are factory set with 
macro programs. You can also program your own macros 
(page 114).

■ Recalling programmed macro-

Press H

MACRO on the remote control.

Press the desired macro button.
“M:the 3-letter name of the selected control area” (for 
example, “M:DVD”) appears in the display window 
(4), and this unit transmits the programmed 
functions. When you press DSTANDBY or 
EPOWER, “M:STB” or “M:PWR” appears in the 
display window (4), and this unit transmits the 
programmed functions.

Press H

MACRO again to exit from the 

• While the remote control is running a macro program (the 

transmission indicator flashes), it does not accept any other 
operation.

• Continue to aim the remote control at the component the macro 

is operating until the macro operation is complete.

• If you do not complete each of the operations within 30 

seconds, this unit automatically exits from the macro-operation 
mode.

■ Default macro functions

*1 Set the appropriate remote control code for TV in advance 

(page 109).

*2 This unit plays the last received station or selected contents 

before the unit was set in the standby mode.

MACRO

—

   (*1)

   (*2)

   (*2)

   (*2)

   (*2)