Yamaha RX-V3900 User Manual

You can clear all changes made in each function set, such 
as learned functions, macros, renamed control area names 
and setup remote control ID.

■ Clearing function sets

Press G

SETUP using a ballpoint pen or 

similar object.
“SETUP” appears in the display window (4).

Press 9k / n repeatedly to select “CLEAR” 
and then press 9

ENTER.

Press 9k / n repeatedly to select the desired 
clear mode.

Press and hold 9

ENTER for about 3 

seconds.
When the clearing is successful, “OK” appears in the 
display window (4).

• “NG” appears in the display window (4) if clearing was 

unsuccessful.

• “ERROR” appears in the display window (4) if you press a 

button not indicated in the respective step, or if you press more 
than one button simultaneously.

Press G

SETUP again to exit from the setup 

■ Clearing a learned function

Press G

SETUP using a ballpoint pen or 

similar object.
“SETUP” appears in the display window (4).

Press 9k / n repeatedly to select “ERASE” 
and then press 9

ENTER.

Set the operation mode selector to 
F

SOURCE and then press an input selector 

button (3).
If you want to erase the function learned in the AMP 
or TV control area, set the operation mode selector to 
FAMP or FTV.

Press 9

ENTER.

“E-KEY” appears in the display window (4).

Press and hold the button you want to clear 
for about 3 seconds.
If clearing is successful, “OK” appears in the display 
window (4).

y

• If you continuously want to clear another function, repeat 

step 3 through 5.

• Once you clear a learned function, the button reverts to the 

factory setting (or to the manufacturer setting if you have 
set remote control codes).

Press G

SETUP again to exit from the setup 

• “NG” appears in the display window (4) on the remote control 

if clearing was unsuccessful.

• “ERROR” appears in the display window (4) if you press 

more than one button simultaneously.

L:DVD (etc.)

(L:Three-digit name of the selected control area) 
Clears all learned functions the respective 
control area. You can change the control area to 
be cleared by pressing the desired input selector 
button (3) or 5SELECT l / h repeatedly.

L:AMP

Sets all learned functions for controlling the 
amplifier functions to the initial factory settings. 
Set the operation mode selector to FAMP to 
select this clear mode.

L:TV

Clears all learned functions for TV control area. 
Set the operation mode selector to FTV to 
select this clear mode.

L:ALL

Clears all learned functions.

M:DVD (etc.)

(M:Name of the selected macro button) Clears 
the macro programmed for the selected macro 
button (page 114). The assigned macro to the 
selected macro button reverts to the initial 
factory macro. Press the desired macro button if 
you want to change the macro button you want to 
clear the programmed functions of.

M:ALL

Clears all programmed macros. The assigned 
macro to the selected macro button reverts to the 
initial factory macro.

RNAME

Set all the name of the control areas to the 
default settings.

FCTRY

Set all settings of the remote control to the initial 
factory settings.