Yamaha RX-A2010 User Manual

En

Configures the speaker settings manually.

■ 

Registers two speaker setting patterns and switches between them.
When you configure the following speaker settings, the settings will be memorized in 
the selected pattern.

- Measurement results (Auto Setup)
- Power Amp Assign
- Configuration
- Distance
- Level
- Parametric EQ

Settings
Pattern1 (default), Pattern2

• The setting pattern currently selected is shown at the top of the “Auto Setup” and “Manual Setup” screens.

■ 

Copies the “Setting Pattern” parameters in the specified direction.

■ 

Selects a speaker system.
This unit has 9 built-in amplifiers. You can connect 2 to 11 speakers and up to 2 
subwoofers (with built-in amplifier) to create the favorite acoustic space in your room. 
You can also apply bi-amp connections, channel expansion (using an external power 
amplifier) or multi-zone configurations to enhance your system.

Pattern1 > 2

Copies the “Pattern1” parameters to “Pattern2”.

Pattern2 > 1

Copies the “Pattern2” parameters to “Pattern1”.

Basic (default)

Select this when you use the basic speaker configuration (9-channel 
plus rear presence speakers) (p.16).

7ch +1ZONE

Select this when you use 7-channel speakers in the main zone and 
Zone2 (or Zone3) speakers (p.24).
You can select a zone to be assigned to the EXTRA SP1 jacks 
(default: Zone2).

9ch +1ZONE

Select this when you use 9-channel speakers in the main zone and 
Zone3 (or Zone2) speakers (p.24).
You can select a zone to be assigned to the EXTRA SP2 jacks 
(default: Zone3).

7ch +2ZONE

Select this when you use 7-channel speakers in the main zone, plus 
Zone2 and Zone3 speakers (p.25).
You can select a zone to be assigned to the EXTRA SP1 jacks 
(default: Zone2) and EXTRA SP2 jacks (default: Zone3).

7ch 
+FRONT+1ZONE

Select this when you use 7-channel speakers plus front channel 
expansion using an external amplifier in the main zone and Zone3 (or 
Zone2) speakers (p.23).
You can select a zone to be assigned to the EXTRA SP2 jacks 
(default: Zone3).

5ch 
+FRONT+2ZONE

Select this when you use 5-channel speakers plus front channel 
expansion using an external amplifier in the main zone, plus Zone2 and 
Zone 3 speakers (p.23).
You can select a zone to be assigned to the EXTRA SP1 jacks 
(default: Zone2) and EXTRA SP2 jacks (default: Zone3).

7ch BI-AMP

Select this when you use 7-channel speakers (including bi-amp front 
speakers) (p.22).