Yamaha RX-A2010 User Manual

En

Change the speaker impedance settings of unit depending on the impedance of the 
speakers connected.

Turn on/off the remote control sensor on the main unit. While the remote control sensor 
is turned off, you cannot control this unit from the remote control.

Select the remote control ID of the main unit so that it matches to the ID of the remote 
control (default: ID1). When using multiple Yamaha AV receivers, you can set each 
remote control with a unique remote control ID for its corresponding receiver.

Settings
ID1 (default), ID2

■ 

Perform each of the following steps within 30 seconds. Otherwise, the setting will be 
automatically canceled.

SPEAKER IMP.

Changes the speaker impedance setting.

REMOTE SENSOR

Turns on/off of the remote control sensor on the main 
unit.

REMOTE CON AMP

Selects the remote control ID of the main unit.

SIRIUS LOCK

Resets the Parental Lock code number for SIRIUS 
Satellite Radio.

TV FORMAT

Switches the video signal type.

MONITOR CHECK

Removes the limitation on HDMI video output.

RECOV./BACKUP

Creates backup of the settings of this unit, or recovers 
the settings from the backup.

INITIALIZE

Restores the default settings.

FIRM UPDATE

Updates the firmware.

VERSION

Checks the version of firmware currently installed on 
this unit.

6 

Ω MIN

Select this when you connect 6-ohm speakers to this unit. You can also 
use 4-ohm speakers as the front speakers.

8 

Ω MIN (default)

Select this when you connect 8-ohm or higher speakers to this unit.

         8  M I N

 S P E A K E R  I M P .

SPIMP.-

ON (default)

Turns on the remote control sensor.

OFF

Turns off the remote control sensor.

            O N

R E M O T E  S E N S O R

SPIMP.-

           I D 1

R E M O T E  C O N  A M P

SPIMP.-

PRESET

5020