Yamaha RX-A2010 User Manual

En

Once the remote control ID is registered successfully, “OK” appears in the display window.

If “ERROR” appears, registration failed. Repeat from step 3.

• The registered remote control codes (p.128) are not cleared even if you change the remote control ID.

Reset the Parental Lock code number for SIRIUS Satellite Radio.

Switch the video signal type of this unit so that it matches to the format of your TV.

Settings
NTSC (default), PAL

This unit automatically detects resolutions supported by a TV connected to the HDMI 
OUT jacks.
If you want to select a resolution in “Resolution” (p.114) regardless of the detection 
results or if this unit does not detect it correctly, disable the monitor check function.

• In case this unit becomes inoperable because videos from this unit cannot be displayed on the TV after 

“MONITOR CHECK” is set to “SKIP”, reset the setting to “YES”.

Creates backup of the settings of this unit, or recovers the settings from the backup.

■ 

RESET

Resets the Parental Lock code number.

CANCEL

Does not perform a reset.

        C A N C E L

 S I R I U S  L O C K

SPIMP.-

          N T S C

  T V  F O R M A T

SPIMP.-

           Y E S

M O N I T O R  C H E C K

SPIMP.-

YES (default)

Enables the monitor check function. (Outputs video signals with a 
resolution supported by the TV only.) 

SKIP

Disables the monitor check function. (Outputs video signals with a 
specified resolution regardless of compatibility with the TV.)

BACKUP

Creates backup of the settings of this unit in the internal memory.

RECOVERY

Recovers the settings of this unit from the backup (available only when 
backup has been created).

• Do not turn off this unit during the recovery process. Otherwise, the settings may not be restored 

correctly.

• The backup does not contain user information (user account, password, etc.) or unit-specific 

information (MAC address, IP address, etc).

        B A C K U P

R E C O V . / B A C K U P

SPIMP.-