Yamaha RX-Z7 User Manual

• When you use the external amplifiers in Zone 2 or Zone 3, 

JVOLUME +/– can be used only when “Zone2 Volume” or 
“Zone3 Volume” is set to “Variable” (page 103).

• You cannot adjust the volume level of Zone 4 with the controls 

on this unit. Use controls on the Zone 4 component to adjust it.

■ Adjusting the front speaker balance of 

D

TONE CONTROL repeatedly to select 

M

PROGRAM 

■ Adjusting the tonal quality of Zone 2 or 

You cannot adjust the front speaker balance of Zone 4 with the 
controls on this unit. Use controls on the Zone 4 component to 
adjust it.

D

TONE CONTROL repeatedly to select 

M

PROGRAM selector for adjustment.

Control range: –10.0 dB to +10.0 dB

■ Setting the sleep timer for Zone 2, Zone 

Use this feature to turn of the desired zone after a certain 
amount of time.

Set the operation mode to F

AMP and then press 

C

SLEEP repeatedly to set the amount of time.

The sleep timer setting changes as shown below.

■ Using the zone OSD

You can display the FM/AM radio, XM Satellite Radio 
(U.S.A. and Canada models only), or HD Radio 
information (U.S.A. model only) in the video monitor 
connected to the ZONE VIDEO jacks. You can also 
browse music contents (such as iPod contents) by using 
the zone OSD.

Set the operation mode selector to F

AMP 

and then press the desired input selector 
button (3).

Press K

DISPLAY to display the menu 

Use 9k / n / l / h and 9

ENTER to 

• The menu displayed in the zone OSD appears in English 

even if Japanese or Russian is selected.

• There are some characters that cannot be displayed in the 

front panel display or in the OSD of this unit. Those 
characters are replaced with underscores “_”.

y

• You can select the zone(s) of which the operational status 

is displayed (page 104).

• You can operate the zone OSD in the same way as GUI 

operations.

120min.

90min.

60min.

30min.

OFF