Yamaha RX-Z7 User Manual
95
En
Graphical user interface (GUI) menu
AD
V
ANCED
OPERA
T
ION
The available speaker channels differ depending on the setting
of the speakers.
of the speakers.
Use this menu to manually adjust the various volume
settings.
settings.
Adaptive DRC (Adaptive dynamic range control)
Use this feature to adjust the dynamic range in
conjunction with the volume level. This feature is useful
when you are listening at lower volumes or at night. When
“Adaptive DRC” is set to “Auto”, this unit controls the
dynamic range as follows:
Use this feature to adjust the dynamic range in
conjunction with the volume level. This feature is useful
when you are listening at lower volumes or at night. When
“Adaptive DRC” is set to “Auto”, this unit controls the
dynamic range as follows:
– If the VOLUME setting is low: the dynamic range is
narrow
– If the VOLUME setting is high: the dynamic range
is wide
y
• You can also adjust the dynamic range of the bitstream signal
sources by using “Dynamic Range” in “Sound” (page 96).
• This function is also useful for listening with your headphones.
The adaptive dynamic range control feature does not function
when this unit is in the PURE DIRECT mode (page 54).
when this unit is in the PURE DIRECT mode (page 54).
Adaptive DSP Level (Adaptive DSP effect level)
Use this feature to make fine adjustments of the DSP
effect level (page 85) automatically in conjunction with
the volume level.
Use this feature to make fine adjustments of the DSP
effect level (page 85) automatically in conjunction with
the volume level.
Even if you set “Adaptive DSP Level” to “Auto”, this unit does
not change but fine-tunes the specified value of “DSP Level”
(page 85).
not change but fine-tunes the specified value of “DSP Level”
(page 85).
Max Volume (Maximum volume)
Use this feature to set the maximum volume level in the main
zone. This feature is useful to avoid the unexpected loud
sound by mistake. For example, the original volume range is
–80.0 dB to +16.5 dB. However, when “Max Volume” is set
to –5.0 dB, the volume range becomes –80.0 dB to –5.0 dB.
Control range: –30.0 dB to +15.0 dB, +16.5 dB
Control step: 5.0 dB
Use this feature to set the maximum volume level in the main
zone. This feature is useful to avoid the unexpected loud
sound by mistake. For example, the original volume range is
–80.0 dB to +16.5 dB. However, when “Max Volume” is set
to –5.0 dB, the volume range becomes –80.0 dB to –5.0 dB.
Control range: –30.0 dB to +15.0 dB, +16.5 dB
Control step: 5.0 dB
Initial Volume (Initial volume)
Use this feature to set the volume level of the main zone
when the power of this unit is turned on.
Choices: Off, Mute, –80.0 dB to +16.5 dB
Control step: 0.5 dB
Use this feature to set the volume level of the main zone
when the power of this unit is turned on.
Choices: Off, Mute, –80.0 dB to +16.5 dB
Control step: 0.5 dB
• When this unit is in the auto setup procedure, the volume level
is automatically set to 0 dB regardless of the current “Max
Volume” setting.
Volume” setting.
• The “Max Volume” setting takes priority over the initial volume
setting.
Muting Type (Muting type)
Use this feature to adjust how much the mute function
reduces the output volume (page 44).
Use this feature to adjust how much the mute function
reduces the output volume (page 44).
Note
Setup (Volume)
Choice
Functions
Auto
Adjusts the dynamic range automatically.
Off
Does not adjust the dynamic range
automatically.
automatically.
Note
Choice
Functions
Auto
Adjusts the DSP effect level in conjunction
with the volume level.
with the volume level.
Off
Does not adjust the DSP effect level
automatically.
automatically.
Note
Input level
Output le
v
el
Output le
v
el
Input level
Auto
Off
Auto
Off
VOLUME: low
VOLUME: high
Notes
Choice
Functions
Full
Mutes all the audio output.
–20dB
Reduces the current volume by 20 dB.
–40dB
Reduces the current volume by 40 dB.