Yamaha RX-Z7 User Manual

Manual parametric equalizer configuration of 
each speaker 
Use this feature to adjust the tonal quality of each speaker. 
You can copy the results of the automatic setup for the 
base of the manual configuration by using “PEQ Data 
Copy”. Set “PEQ Select” to “Manual” in advance.

Press 9k / n / l / h to select “Test Tone” or 
the speaker you want to adjust.

Test Tone
Use this feature to select whether to turn on or off the 
test tone output while you are adjusting the tonal 
quality of each speaker.

Press 9h to access the settings window.

Press 9k / n / l / h to select “PARAM” and 
then press 9

ENTER repeatedly to select a 

y

You can adjust “Gain” (gain) with any parameter.

Press 9n to select “EDIT” and press 
9

ENTER to access the edit window.

For more information on the parametric equalizer and 
each parameter, see page 153.

The parameter selected in “PARAM” is highlighted.
• Press 9l / h to adjust the parameter.
• Press 9k / n to adjust the “Gain”.
• Press 9ENTER to exit the edit window.

y

• When you select “Band” in step 3, you can use this menu 

as a graphic equalizer.

• “Band #5”, “Band #6”, and “Band #7” can adjust the 

frequencies of above 500 Hz.

• When you select “Subwoofer” in step 1 and “Band” in step 3, 

you can adjust “Band #1”, “Band #2”, “Band #3” and “Band 
#4” only. In this case, “Band #1”, “Band #2”, “Band #3” and 
“Band #4” adjust the frequencies of below 200 Hz.

y

If you want to reset all “Parametric EQ” parameter settings 
for the selected speaker, select “RESET” and press 
9ENTER.

Select “EXIT” and press 9

ENTER to exit 

■ Tone Control (Tone control)

Use this feature to adjust the balance of bass and treble 
output to your speakers or headphones.

Tone Control is not effective when:
– the PURE DIRECT mode (page 54) is selected.
– MULTI CH is selected as the input source.

y

“Speaker” and “Headphone” adjustments are stored 
independently. The adjustments for “Speaker” affects the front 
left/right speaker, center speaker and subwoofer channels.

Front L

Front left speaker

Front R

Front right speaker

Center

Center speaker

Surround L

Surround left speaker

Surround R

Surround right speaker

Surround Back L

Surround back left speaker

Surround Back R

Surround back right speaker

Front Presence L

Front presence left speaker

Front Presence R

Front presence right speaker

Subwoofer

Subwoofer

On

Outputs the test tone.

Does not output the test tone.

Adjust the bass/treble balance of your speakers.

Headphone

Adjust the bass/treble balance of your 
headphones.