Yamaha HTR-6080 User Guide

Make sure this unit is turned off.
Refer to the right column for details.

Press and hold B

TONE CONTROL on the 

front panel and then press A

STANDBY/ON 

inward to the ON position to turn on this unit.
This unit turns on, and the advanced setup menu 
appears in the front panel display.

Rotate the C

PROGRAM selector on the 

front panel to select “SP IMP.”.
“SP IMP.” and the current speaker impedance setting 
(“8

Ω MIN”) appear in the front panel display.

Press B

TONE CONTROL on the front 

Ω MIN”.

Press A

STANDBY/ON on the front panel to 

The setting you made is reflected next time you turn on this 
unit.

■ Turning on this unit

Press A

STANDBY/ON on the front panel to turn 

y

When you turn on this unit, there will be a 4 to 5-second delay 
before this unit can reproduce sound.

■ Set this unit to the standby mode 

Press A

STANDBY/ON (or GSTANDBY) to 

set this unit to the standby mode.
In the standby mode, this unit consumes a small amount of 
power in order to receive infrared signals from the remote 
control.

y

• You can also turn on this unit by pressing ESCENE (or 

FSCENE) buttons.

• When you turn on this unit, there will be a 4 to 5-second delay 

before this unit can reproduce sound.

Caution
If you are to use 6 ohm speakers, set “SP IMP.” to 
“6

Ω MIN” as follows BEFORE using this unit. 4 ohm 

speakers can be also used as the front speakers.