Yamaha HTR-6080 사용자 가이드
![Yamaha](https://files.manualsbrain.com/attachments/884c61a284ec9743365c8176528d257dbb7df7e8/common/fit/150/50/873735ee4330929e1549bc72378da029dfa61bac72d66c1f7587e7b724ba/brand_logo.png)
25
En
Connections
PREP
ARA
TION
English
1
Make sure this unit is turned off.
Refer to the right column for details.
Refer to the right column for details.
2
Press and hold B
TONE CONTROL on the
front panel and then press A
STANDBY/ON
inward to the ON position to turn on this unit.
This unit turns on, and the advanced setup menu
appears in the front panel display.
This unit turns on, and the advanced setup menu
appears in the front panel display.
3
Rotate the C
PROGRAM selector on the
front panel to select “SP IMP.”.
“SP IMP.” and the current speaker impedance setting
(“8
“SP IMP.” and the current speaker impedance setting
(“8
Ω MIN”) appear in the front panel display.
4
Press B
TONE CONTROL on the front
panel repeatedly to select “6
Ω MIN”.
5
Press A
STANDBY/ON on the front panel to
save the new setting and turn off this unit.
The setting you made is reflected next time you turn on this
unit.
unit.
■ Turning on this unit
Press A
STANDBY/ON on the front panel to turn
on this unit.
y
When you turn on this unit, there will be a 4 to 5-second delay
before this unit can reproduce sound.
before this unit can reproduce sound.
■ Set this unit to the standby mode
Press A
STANDBY/ON (or GSTANDBY) to
set this unit to the standby mode.
In the standby mode, this unit consumes a small amount of
power in order to receive infrared signals from the remote
control.
In the standby mode, this unit consumes a small amount of
power in order to receive infrared signals from the remote
control.
y
• You can also turn on this unit by pressing ESCENE (or
FSCENE) buttons.
• When you turn on this unit, there will be a 4 to 5-second delay
before this unit can reproduce sound.
Setting the speaker impedance
Caution
If you are to use 6 ohm speakers, set “SP IMP.” to
“6
If you are to use 6 ohm speakers, set “SP IMP.” to
“6
Ω MIN” as follows BEFORE using this unit. 4 ohm
speakers can be also used as the front speakers.
Note
TONE CONTROL
STANDBY
/ON
While holding
down
Turning this unit on and off