Kenwood KRF-V8300D User Manual
English
33
Set
u
p
5
Continue the measurement.
7 If a confirmation message (fi) is displayed:
Use [MULTI CONTROL
Use [MULTI CONTROL
3] to select "Continue".
[ENTER]
7
If an error message (
›) is displayed:
Use [MULTI CONTROL
3] to select "Retry".
[ENTER]
The measurement starts again.
6
Auto Setup completes.
The display changes from "Analyzing" to "Complete" when
Auto Setup completes.
Auto Setup completes.
When "Confirm" is displayed, pressing the [ENTER] key
makes it possible to confirm the measurement data. (See
<To confirm the measurement data>
makes it possible to confirm the measurement data. (See
<To confirm the measurement data>
‹.)
Use [MULTI CONTROL
2/3] to select "Return".
[ENTER]
• Certain listening room properties may cause errors in the results
of measurements of the speaker levels and distances. In this case,
set up the unit again using "Manual Setup". (See <Speaker setup
–"Manual Setup"–>
set up the unit again using "Manual Setup". (See <Speaker setup
–"Manual Setup"–>
fl.)
• If the speakers or speaker placement have changed after auto
setup, perform the auto setup again.
To confirm the measurement data
1
Select "Confirm" and press [ENTER] in step 3.
2
Use [MULTI CONTROL
2/3] to select the item to be
confirmed and press [ENTER]. And then use [MULTI
CONTROL
CONTROL
2/3] to confirm its data.
The following setting data can be confirmed.
– Speaker configuration ("SP Setup")
– Speaker levels ("SP Level")
– Speaker distances ("SP Distance")
– Crossover frequency ("Crossover")
– Speaker levels ("SP Level")
– Speaker distances ("SP Distance")
– Crossover frequency ("Crossover")
For details on the setting items, see <Speaker setup
–"Manual Setup"–>
–"Manual Setup"–>
fl.
To cancel measurement in the middle
Any of the following operations will stop the measurement in the
middle and returns the display to the normal input display.
middle and returns the display to the normal input display.
• Power ON/OFF
• Pressing the [AUTO ROOM EQ] key
• Press the [SETUP] key
• Pressing the [INPUT SELECTOR] key
• Pressing the [AUTO ROOM EQ] key
• Press the [SETUP] key
• Pressing the [INPUT SELECTOR] key
B60-5740-00_00_EN.indd 33
B60-5740-00_00_EN.indd 33
08.7.17 3:29:56 PM
08.7.17 3:29:56 PM