Integra DTR-10.5 User Manual

47

 

The

 

 terminal on the DTR-10.5 is for connecting 

other Integra/Onkyo components equipped with the 
same

 

 terminal. When a component is connected to 

the

 

 terminal, it can be operated by the remote 

controller supplied with the DTR-10.5. In addition, 
when you connect a component to the

 

 terminal, you 

can also perform the system operations given below.

 

When the DTR-10.5 is in the standby state, if an

 

-

connected component is turned on, the DTR-10.5 also 
turns on and the input source selected at the DTR-10.5 
automatically switches to that component.
Be aware that this function will not work if the power cord 
for the

 

-connected component is connected to the AC 

OUTLET on the DTR-10.5, or if the DTR-10.5 has 
already been turned on.

 

When the play button is pressed on an

 

-connected 

component, the input source selected at the DTR-10.5 
automatically changes to that component. 

 

When the DTR-10.5 is placed in the standby state, all

 

-connected components are also automatically put 

into the standby state.
Also, if you press the [On] button on the DTR-10.5 
remote controller while the DTR-10.5 is turned on, all

 

-connected components (DVD players, CD players, 

MD recorders, tuners, etc.) are also turned on.

To connect components using the

 

 terminal, simply 

connect a remote control cable from this

 

 terminal to 

the

 

 terminal of the other component. An

 

 remote 

control cable with a 1/8 inch (3.5 mm) miniature two-
conductor plug comes with every cassette tape deck, 
compact disc player, MD recorder, and DVD player that 
has an

 

 terminal.

• When performing operations with

 

-connected 

components using the

 

 system, do not use the 

remote zone (Zone 2/Zone3).

• For remote control operation, the audio connection 

cables must also be connected.

• If a component has two

 

 terminals, you can use 

either one to connect to the DTR-10.5. The other one 
can be used to daisy chain with another component.

• With Integra DVD players, you can enter the pre-

program code so that you can operate the DVD player 
directly with the remote controller without connecting 
the

 

 terminals (See page 129).