Pioneer VSX-D2011-S User Manual

En

All the display information is explained and/or referenced here.

it lights when the station you are currently
tuned to carries the EON data service.

Lights when a HI-BIT/SAMPLING mode is on.

MOVIE: Lights when a MOVIE mode is
selected. When a DSP MOVIE mode is select-
ed DSP will light with a box around it.

MUSIC: Lights when a MUSIC mode is
selected. When a DSP MUSIC mode is select-
ed DSP will light with a box around it.

For Dolby Digital or DTS sources: These
indicators change according to which channels
are active in the source. When all three LS (left
surround), S (surround) and RS (right surround)
light at the same time it means a source with a
6.1 channel playback flag is being used.

L – Left front channel.
C – Center channel.
R – Right front channel.
LS – Left surround channel.
S – Surround channel or Surround back channel.
RS – Right surround channel.
LFE – Low Frequency Effects channel.
‡ – Lights when LFE signal is input.

Light to indicate the status of the surround
back channels.

AUTO – Lights when the SB CH MODE or
VIRTUAL SURROUND BACK mode is set to
AUTO.

ON – Lights when the SB CH MODE or
VIRTUAL SURROUND BACK mode is set to
ON.

OFF – Lights when the SB CH MODE or
VIRTUAL SURROUND BACK mode is set to
OFF.

Light to indicate the input signal you selected.

AUTO: Lights when the receiver is set to select
the input signal automatically.
DIGITAL: Lights when digital audio signals are
selected.
ANALOG: Lights when analog signals are
selected.

PRO LOGIC II: Lights during Dolby Pro Logic II
processing.
NEO:6: Lights during NEO:6 processing.

2

 DIGITAL: Lights when a Dolby Digital signal is

detected.
DTS: Lights when a DTS signal is detected.
ES: Lights when playing back a DTS ES signal.
EX: Lights  when playing back a Dolby Digital EX
signal.
STEREO: Lights during two-channel playback.

Lights when LOUDNESS is on.

Lights when MIDNIGHT is on.

Lights when the TONE control is on.

Lights when DIGITAL NR is on.

STEREO: Lights when an FM stereo broadcast
is received in the auto stereo mode.

MONO: Lights when the tuner is set to receive
FM broadcasts and when MPX mode is selected.

TUNED: Lights when a broadcast is received.

RF ATT (European model only): Lights when
the RF ATT is on (see p.57).

RDS (European model only): Lights when an
RDS broadcast is received.

EON o (European model only): EON lights
when it has been set. The dot indicator next to