Pioneer VSX-D2011-S User Manual

En

All the terminals on the back panel are explained and/or referenced here.

Use these terminals to input the signal from a
DVD, CD player or any other kind of digital
player. To be able to play Dolby Digital and
other surround soundtracks you need to make
digital connections. To do this use the digital
terminals here. If you don't connect as per the
default settings (see page 23) you need to
complete "Assigning the Digital Inputs" (see
page 91).

Use these terminals to output a digital signal to
a DVD-R, CD-R, MD recorder or any other kind
of digital recorder.

You can use this jack to hook up other
PIONEER equipment, that has a CONTROL
terminal, so that you can control them all by
pointing the remote control(s) at one remote
sensor.

Hook up antennas for the radio tuner built into
the receiver here.

Use either of these terminals to output the
video signal to your TV(s), video projector(s) or
monitor(s). The on-screen displays to setup the
receiver will only be output through MONITOR
OUT 1.

Use these terminals to output the audio signal
from this amplifier to a different amplifier if
that's how you choose to set up your system.

Use these terminals to output the video signal
from the COMPONENT VIDEO IN terminals to
your TV. See #16 for more information.

Use these terminals to connect speakers to the
receiver. The FRONT, CENTER and SUR-
ROUND terminals are for the main speaker
system and the SURROUND BACK speakers
can be set to either the main system or the
SECOND ZONE. See page 37 to set the
SURROUND BACK speakers.

PCM/
2DIGITAL /
DTS/MPEG

1

2

3

4

Ω