Sony STR-DN1010 User Manual

D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm

STR-DN1010

4-174-068-11(1)

 

 

 

 

 

 

x When “Party” is set

The S-AIR receiver’s input changes 
sequentially as you change the input on 
the S-AIR main unit or S-AIR receiver.

x When “Separate” is set

The S-AIR receiver’s input changes by 
pressing S-AIR CH of the S-AIR 
receiver.

When TUNER (FM/AM band) is selected on 
the S-AIR main unit, you can only select the 
same band for the tuner on the S-AIR receiver. 
However, you can select input other than 
TUNER on the S-AIR receiver.

* Models of area code U2, CA2 only.

• The sound of the S-AIR receiver may be cut off by 

operation of the S-AIR main unit.

• When the sound is other than 2 channel stereo, 

multi channel sound is downmixed to 2 channel.

• Signals with a sampling frequency of more than 

 

96 kHz cannot output to the S-AIR receiver.

You can control the system from the S-AIR 
receiver by using the following buttons. 

For details, refer to the operating instructions 
of the S-AIR receiver. 

 

If you use multiple wireless systems which 
share the 2.4 GHz band, such as wireless LAN 
or Bluetooth, the transmission of S-AIR 
products or other wireless systems may be 
unstable. In this case, transmission may be 
improved by changing the “RF Change” 
setting.

After “MENU ON” appears on the 
display for a while, “GUI” appears and 
the GUI menu appears on the TV screen.
Press MENU if the GUI menu does not 
appear on the TV screen.

V/v repeatedly to select 

b.

The Settings menu list appears on the TV 
screen.

V/v repeatedly to select 

b.

When the S-AIR transmitter (not supplied) is 
not inserted into the S-AIR main unit, “S-AIR” 
cannot be selected.

N

, X, x,  

 

./>

Share the same operations on the 
remote

S-AIR CH

Change the function of the 
system

GUI MODE

MENU

V/v/b,