Sony STR-DN1010 用户手册
81
GB
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm
masterpage: Right
STR-DN1010
4-174-068-11(1)
S-A
IR Oper
ations
8
Select the desired input on the
S-AIR receiver.
S-AIR receiver.
x When “Party” is set
The S-AIR receiver’s input changes
sequentially as you change the input on
the S-AIR main unit or S-AIR receiver.
sequentially as you change the input on
the S-AIR main unit or S-AIR receiver.
x When “Separate” is set
The S-AIR receiver’s input changes by
pressing S-AIR CH of the S-AIR
receiver.
pressing S-AIR CH of the S-AIR
receiver.
Note
When TUNER (FM/AM band) is selected on
the S-AIR main unit, you can only select the
same band for the tuner on the S-AIR receiver.
However, you can select input other than
TUNER on the S-AIR receiver.
the S-AIR main unit, you can only select the
same band for the tuner on the S-AIR receiver.
However, you can select input other than
TUNER on the S-AIR receiver.
9
Adjust the volume on the S-AIR
receiver.
receiver.
* Models of area code U2, CA2 only.
Notes
• The sound of the S-AIR receiver may be cut off by
operation of the S-AIR main unit.
• When the sound is other than 2 channel stereo,
multi channel sound is downmixed to 2 channel.
• Signals with a sampling frequency of more than
96 kHz cannot output to the S-AIR receiver.
To control the system from the
S-AIR receiver
S-AIR receiver
You can control the system from the S-AIR
receiver by using the following buttons.
receiver by using the following buttons.
For details, refer to the operating instructions
of the S-AIR receiver.
of the S-AIR receiver.
Changing the channel
for better sound
transmission
transmission
If you use multiple wireless systems which
share the 2.4 GHz band, such as wireless LAN
or Bluetooth, the transmission of S-AIR
products or other wireless systems may be
unstable. In this case, transmission may be
improved by changing the “RF Change”
setting.
share the 2.4 GHz band, such as wireless LAN
or Bluetooth, the transmission of S-AIR
products or other wireless systems may be
unstable. In this case, transmission may be
improved by changing the “RF Change”
setting.
1
Press GUI MODE.
After “MENU ON” appears on the
display for a while, “GUI” appears and
the GUI menu appears on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
display for a while, “GUI” appears and
the GUI menu appears on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
2
Press
V/v repeatedly to select
“Settings”, then press
or
b.
The Settings menu list appears on the TV
screen.
screen.
3
Press
V/v repeatedly to select
“S-AIR”, then press
or
b.
Note
When the S-AIR transmitter (not supplied) is
not inserted into the S-AIR main unit, “S-AIR”
cannot be selected.
not inserted into the S-AIR main unit, “S-AIR”
cannot be selected.
Press
Operation
N
, X, x,
./>
Share the same operations on the
remote
remote
S-AIR CH
Change the function of the
system
system
GUI MODE
MENU
V/v/b,
continued