Mark Levinson 500H User Manual

15

Nº500H Series Power Amplifier

1.   From the Start menu, select Settings  Control Panel.

2.   Double-click on the Network and Dial-Up Connections option.

3.  Double-click on the Local Area Connection option.

4.   Click the Properties button to open the Local Area Connection 

Properties menu. If the computer is not currently connected 
to an active network, Step 3 has already opened the Local Area 
Connection Properties menu.

5.   Click on Internet Protocol (TCP/IP) line item so that it is

highlighted.

6.   Click the Properties button.

7.   Select the “Use the following IP address” option. The IP

address, Subnet mask, and Default gateway boxes are no longer
grayed out and can now be modified.

8.    Enter the following values:

• IP address: 192.168.50.x – where x stands for a number

other than 0, 3, 4, 5 or 255

• Subnet mask: 255.255.255.0

• Do not enter a value in the Default gateway parameter

 

 The computer must have a unique address and be on the same 
subnet as the amplifier.

9.   Click “OK” to save and exit the menu.

10. Open the Internet Explorer Web browser.

11.  From the menu bar, select the Tools  Internet Options menu.

12.  Select the Connections tab.

13.  Click the LAN Settings button.

14. Verify that “Use a proxy server for your LAN” is NOT checked.

15. Click “OK” to save and exit the menu.

Use this procedure if you plan to connect with static IP addresses 
(DHCP is turned off). Otherwise, skip to the next procedure to
connect directly to a computer. For the computer to find the 
amplifier, the TCP/IP and LAN settings of the computer must be set
up. Refer to the previous “Setting up the Computer” procedure for
instructions.

1.    Connect the amplifier to the router, as described in the earlier 

“Connecting the Cables” procedure. Make sure that everything
is powered off before making cable connections.

2.   Turn on the PC and the router. Verify that the router has DHCP

turned off, if required.