Mark Levinson 433 User Manual
21
Nº433 Power Amplifier
other linked components, possibly voiding the manufacturer’s
warranty and/or standard repair policies.
warranty and/or standard repair policies.
Constructing Link
Communication Cables
Link communication cables can be constructed using a
six-conductor modular Cat. 5 cable with the appropriate plug
crimped on each end.
six-conductor modular Cat. 5 cable with the appropriate plug
crimped on each end.
•
Use a six-conductor cable (six-pin RJ-11 plug to eight-pin RJ-45
plug) when connecting the Nº433 to a Nº320S or Nº326S pream-
plifier. (Pins seven and eight are not used on the eight-pin RJ-45
plug.)
plug) when connecting the Nº433 to a Nº320S or Nº326S pream-
plifier. (Pins seven and eight are not used on the eight-pin RJ-45
plug.)
•
Use a six-conductor cable (six-pin RJ-11 plug to six-pin RJ-11
plug) when connecting the Nº433 to other Mark Levinson
preamplifiers, including the Nº380, Nº380S and Nº32 Reference.
plug) when connecting the Nº433 to other Mark Levinson
preamplifiers, including the Nº380, Nº380S and Nº32 Reference.
•
Use a six-conductor cable (six-pin RJ-11 plug to eight-pin RJ-45
plug) when connecting the Nº433 to other Mark Levinson
power amplifiers. (Pins seven and eight are not used on the
eight-pin RJ-45 plug.)
plug) when connecting the Nº433 to other Mark Levinson
power amplifiers. (Pins seven and eight are not used on the
eight-pin RJ-45 plug.)
Note
BEFORE making Link connections, refer to the appropriate documen-
tation for Link or
tation for Link or
communication port specifications for other
Mark Levinson components.
When linking components with constructed Link communication
cables, twist the cable 180
cables, twist the cable 180
°
as shown in the illustration below for a
straight-through (pin 1-to-pin 1) connection.