ONKYO A-1VL User Manual
11
Connecting the A-1VL—Continued
Connecting a Power Amplifier
You can use the A-1VL as a preamplifier by connecting
the A-1VL to a power amplifier.
When you use the A-1VL as a preamplifer, connect the
main in terminals on the power amplifier to the PRE-
OUT terminals on the A-1VL.
the A-1VL to a power amplifier.
When you use the A-1VL as a preamplifer, connect the
main in terminals on the power amplifier to the PRE-
OUT terminals on the A-1VL.
Note:
The signal from the PREOUT terminal will be output
whether the DIRECT function is enabled or not.
The signal from the PREOUT terminal will be output
whether the DIRECT function is enabled or not.
Connecting a Preamp
You can use the A-1VL as a power amplifier by
connecting the A-1VL to a preamplifier.
When you use the A-1VL as a power amplifier, connect
the pre out terminals on the preamplifier to the MAIN
IN terminals on the A-1VL.
You can enjoy surround sound playback by connecting
front left and right speakers to the A-1VL and connect-
ing center and surround speakers to the preamplifier. If
you have a powered subwoofer, connect it to the
preamplifier’s PRE OUT.
connecting the A-1VL to a preamplifier.
When you use the A-1VL as a power amplifier, connect
the pre out terminals on the preamplifier to the MAIN
IN terminals on the A-1VL.
You can enjoy surround sound playback by connecting
front left and right speakers to the A-1VL and connect-
ing center and surround speakers to the preamplifier. If
you have a powered subwoofer, connect it to the
preamplifier’s PRE OUT.
Note:
Before you use the A-1VL as a power amplifier, be sure
to turn on the DIRECT function by pressing the
DIRECT button. (page 13)
Before you use the A-1VL as a power amplifier, be sure
to turn on the DIRECT function by pressing the
DIRECT button. (page 13)
Connecting the Power Cord
Notes:
• Before connecting the power cord, connect all of your
• Before connecting the power cord, connect all of your
speakers and audio components.
• Turning on the A-1VL may cause a momentary
power surge that might interfere with other electrical
equipment on the same circuit. If this is a problem,
plug the A-1VL into a different circuit.
equipment on the same circuit. If this is a problem,
plug the A-1VL into a different circuit.
• Do not use a power cord other than the one supplied
with the A-1VL. The supplied power cord is designed
exclusively for use with the A-1VL and should not be
used with any other equipment.
exclusively for use with the A-1VL and should not be
used with any other equipment.
• Never disconnect the power cord from the A-1VL
while the other end is still plugged into a wall outlet.
Doing so may cause an electric shock. Always
disconnect the power cord from the wall outlet first,
and then the A-1VL.
Doing so may cause an electric shock. Always
disconnect the power cord from the wall outlet first,
and then the A-1VL.
1. Connect the supplied power cord to the A-1VL’s AC
INLET.
2. Plug the power cord into an AC wall outlet.
L
R
L
R
LINE IN
PREOUT
MAIN IN
PRE OUT
L
R
L
R
AC INLET
To AC wall outlet